Dear Prof. David Mašín
I am posting the queries I have emailed you as per your advice to post it here.
During calibration for the basic hypoplasticity parameters using the SoilModel calibration tool, one oedometer and three triaxial tests were required. My question is: Do the calibration be fit for all the three tests at the same time?
Abdulaziz O.
Tags: Calibration software
Connecting remote sensors to the Plaxis FEM 3D using python 26.7.2024
Intergranular Strain Extensions 16.7.2024
Abaqus Hypoplasticity Primary Variable Is Not Available 1.7.2024
Vumat to calculate excess pore in Coupled Eulerian-Lagrangian ABAQUS 1.7.2024
Drucker Prager Cap Hardening Model 20.6.2024
Soil model for sand under drained cyclic loading 15.6.2024
In Abaqus how do we use *DLOAD for defining both user-defined pressure and body force simultaneously? 15.6.2024
Issue in applying SANISAND04 UMAT to Boundary-Value-Problem 31.5.2024
Triaxial compression test using Mohr-Coulomb model in Abaqus 27.5.2024
The Mises stress calculated by the hypoplasticity model considering the intergranular strain is all 0 20.5.2024
Degradation ( disturbance ) of hypoplastic clay 23.4.2024
Degradation ( disturbance ) of hypoplastic clay 23.4.2024
©2024 SoilModels
Dear Abdulaziz,
If you mean calibration by the ExCalibre software, then yes: it tries to find the best fit considering all the tests available. Of course, you may want to fine-tune the calibration afterwards using “recalibrate” feature if you want to put more emphasis on one of the tests, etc.
Regards David
Thank you Prof. Davis. I got your points.