We are pleased to announce that DIANA 10.4 is released with full 2D geotechnical possibilities. DIANA is already easy to use for full 3D geotechnical models, and now the more simplified 2D approach is made available for ease of use.
Now daily design models (with library of sheetpiles and staged construction) can also be done in a fast and simplified approach.
https://dianafea.com/index.php/
DIANA 10.4 released with full Geotechnical possibilities 3D as always, but now also 2D!
Related Articles
-
ABAQUS Mesh-to-mesh solution mapping with Modified Cam Clay
Samanthika Liyanapathirana||Finite Elements|0 |Views 3,845
I am using the mesh-to-mesh solution mapping with MCC model. The element type used is CPE8RP. My initial analysis runs without any issue and when the deformations reach a certain […] -
Abaqus vs Plaxis – Local Convergence Tolerances
Sina Azad||Finite Elements|1 |Views 4,736
Hi, I have a question regarding local, material-level convergence tolerances in FE software, particularly Abaqus and Plaxis. I have experience using Abaqus but not much familiar with Plaxis. As shown […] -
Transient Dynamic analysis (U-P formulation)
anis kheffache||Finite Elements|4 |Views 4,119
Hi everyone, i want to carry out some transient dynamic analysis. as far as I know, dynamic steps in abaqus does not allow for pore pressure build-up and dissipation, and […] -
Some confusion about the parameters in Abaqus umat of Hypoplastic Modeling
Joe Chu||Finite Elements|1 |Views 3,360
Dear all, When I check the umat file of sand hypoplastic modeling, I find there are two parametesr(p_t(2), bulk_w(15)) without any definitions. Could someone kindly explain the exact meaning for […] -
UMAT and oneAPI compiler issues. (SOLVED…i hope :p)
anis kheffache||Finite Elements|7 |Views 1,680
Dear all, A while ago, a person asked about the hypoplasticity umats, the problem was that the umats were not working when compiled using the oneAPI fortran compiler, an error […] -
liquefaction simulation with abaqus
Ruibin Hou||Finite Elements|7 |Views 4,376
Hello, everyone I am an abaqus user and developer. Recently, I want to simulating the liquefaction phenomenon with abaqus/standard or abaqus/explicit. As I know, this cannot be realized using the […] -
finite element modeling of ISA-HP for sand material
arad ahmadi radin||Finite Elements|1 |Views 3,346
On the simulation of the cyclic mobility effect with an ISA -hypoplastic hypoplastic hypoplastic model, is it possible to simulate 3D liquefiable sandy soil by available u-mat file which is […] -
Small displacements when using HP model in Plaxis 3D
Arno Crous||Finite Elements|4 |Views 3,275
I am modelling sand slopes in Plaxis 3D using an HP model. I am using soil parameters from “Modelling of Soil Behaviour with Hypoplasticity” by David Masin (2019). During the […]
0 Comments
https://soilmodels.com/dianafea/
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
- Ignacio Zuloaga on MSE walls design in Plaxis
- Giada Orlando on Problem with VUMAT interface
- Michael Spyridis on Problem with VUMAT interface
- Ahmad Moeineddin on Problem with VUMAT interface
- Nikolay Suyo Calla on Hardening soil Model UMAT