- Version
- Download 214
- File Size 17.34 MB
- File Count 1
- Create Date 11.2.2019
- Last Updated 6.3.2019
Wichtmann, T., Triantafyllidis, Th. (2016): An experimental data base for the development, calibration and verification of constitutive models for sand with focus to cyclic loading. Part II: tests with strain cycles and combined loading. Acta Geotechnica, Vol. 11, No. 4, pp. 763-774 [Preprint]
0 Comments
Search SoilModels Website
Recent posts
- The next ALERT Olek Zienkiewicz school on Constitutive Modelling of Geomaterials will take place at Charles University in Prague from February 3 to 7, 2025 11.10.2024
- Connecting remote sensors to the Plaxis FEM 3D using python 26.7.2024
- Intergranular Strain Extensions 16.7.2024
- Abaqus Hypoplasticity Primary Variable Is Not Available 1.7.2024
- Vumat to calculate excess pore in Coupled Eulerian-Lagrangian ABAQUS 1.7.2024
- Drucker Prager Cap Hardening Model 20.6.2024
- Soil model for sand under drained cyclic loading 15.6.2024
- In Abaqus how do we use *DLOAD for defining both user-defined pressure and body force simultaneously? 15.6.2024
- Issue in applying SANISAND04 UMAT to Boundary-Value-Problem 31.5.2024
- Triaxial compression test using Mohr-Coulomb model in Abaqus 27.5.2024
- The Mises stress calculated by the hypoplasticity model considering the intergranular strain is all 0 20.5.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
Recent Comments
- Johan Clausen on Triaxial compression test using Mohr-Coulomb model in Abaqus
- Ismail Khan on SANISAND for FLAC3D Download
- Tao Zhu on UMAT and oneAPI compiler issues. (SOLVED…i hope :p)
- Lei DAI on SANISAND for FLAC3D Download
- Yu Xiao on “Warning LNK4210” – hypoplastic clay UMAT
- Yu Xiao on “Warning LNK4210” – hypoplastic clay UMAT
- Charbel NOHRA on “Warning LNK4210” – hypoplastic clay UMAT
- Pouya Zahedi on UMAT for hypoplastic subroutine
- Mohsen Misaghian on SANISAND umat issue
- Ashesh Choudhury on Abaqus
- Hu Shihong on Triaxial compression test using Mohr-Coulomb model in Abaqus
- Mert Eyupgiller on Triaxial compression test using Mohr-Coulomb model in Abaqus
- Bala Harsha Srusti on ABAQUS job doesn’t make any increment
- PRATIK GOEL on Hardening parameters (yield stress & absolute plastic strain)
- Ashraf AHMED on ExCalibre – SoilModels Automatic Calibration
- Xy Ma on Sand and clay standard datasets
- Xy Ma on Sand and clay standard datasets
- Ramon Varghese on Hypoplastic Interface Model: Does anybody implemented this model in FLAC3D