At present, I am trying to realize Drucker-Prager Cap model by using vusdfld and usdfld of abaqus. If anyone is willing to share their work, I would be grateful!
Tags: abaqus
||Finite Elements|0 |
||Finite Elements|0 |
Related Articles
-
Hypoplastic model for clays in a Plaxis 2D simulation – Problem
Hello everybody, Using Hypoplastic model for clays, with intergranular concept parameters, I am simulating a simple oedometer test, phase by phase, using a dummy layer on the top of the […] -
ABAQUS-UMAT Help
Hi everyone, I would like to ask if anyone has an example umat file for me to study to work on my master thesis researches. I would like to create […] -
DIANA 10.4 released with full Geotechnical possibilities 3D as always, but now also 2D!
We are pleased to announce that DIANA 10.4 is released with full 2D geotechnical possibilities. DIANA is already easy to use for full 3D geotechnical models, and now the more […] -
UMAT for hypoplastic subroutine
Hello all, Could you please anyone provide me umat for Hypoplastic model that used as subroutine in Abqus 6.14. With Best Regards Naif Mohammed -
Fellin UMAT subroutine
After downloading the umat_vec.f related files (and the spw_hy.inp (publishe by Fellin at all) I got runtime problems in Abaqus 2020 during the first step. The error message in the […] -
hypoplasticity models in free Tochnog Professional
In this post we will list built-in hypoplasticity formulations in the free Tochnog Professional program. Since these hypoplasticity options are built-in there is no need to link external umat routines. […] -
new hypoplasticity laws in Tochnog Professional
The 2014 Masin hypoplasticity for clays has been implemented in Tochnog Professional under guidance of Dr. David Masin. This implementation includes structure, intergranular strains and visco effects. Extensions to the […] -
An error in the SANISAND umat runtime
Dear all I was simulating a pile in a fully drained soil subjected to horizontal loads using ABAQUS (as shown in Figure 1) and noticed from the monitor that the […]
0 Comments
Who is Online
Supporting Organisations
Recent posts
-
Postdoctoral position at COFS, UWA 28.7.2025
-
Hypoplasticity clay in ABAQUS 23.7.2025
-
Drucker-Prager Cap 29.5.2025
-
Abaqus RITSS with hypoplastic 9.4.2025
-
Fellin UMAT subroutine 2.4.2025
-
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
-
Abaqus RITSS methon for LDFE analysis with hypoplastic 17.3.2025
-
Request for VUMAT Implementation of Mohr-Coulomb, Drucker-Prager, or Drucker-Prager Cap 28.2.2025
-
Suggestions for an Advanced Constitutive Model in FEM-Based Dynamic Slope Stability Analysis 12.2.2025
-
Hardening Soil or Hardening Soil-Small umat in Abaqus 2.1.2025
-
hypoplastic interface 11.12.2024
-
Triaxial Test Driver SANISAND 30.10.2024