On the simulation of the cyclic mobility effect with an ISA -hypoplastic hypoplastic hypoplastic model, is it possible to simulate 3D liquefiable sandy soil by available u-mat file which is facilitated by D.R Fuentes?
||Finite Elements|1 |
||Finite Elements|1 |
Related Articles
-
liquefaction simulation with abaqus
Hello, everyone I am an abaqus user and developer. Recently, I want to simulating the liquefaction phenomenon with abaqus/standard or abaqus/explicit. As I know, this cannot be realized using the […] -
DIANA with monopile follows Blum theory saving 10 m of length
Where the client was forced to make all his horizontal loaded Dolphins (piles) 10 m longer we could trustworthy proof that this actually was not necessary saving millions of cost […] -
Free Tochnog Professional list of capabilities and papers
Dear All, you can find a list with some of Tochnog Professional capabilities and application papers at: http://www.tochnogprofessional.nl/Tochnog_Professional_wikipedia_format.pdf Stay safe, Dennis Roddeman -
Plaxis 3D Tunnel
Hi Everybody, I would like to ask an error problem where I am getting while using Plaxis 3D tunnel V 1.2. Previously I was using the software with Windows 7 […] -
Geostatic method for Abaqus/Explicit
Dear all, I recently conducted a numerical simulation of pile-soil interaction. I digged a vertical hole and insert the pile into that with general contact. Due to many reasons, I […] -
Boundary Conditions of Masin 2005 Paper for clay hypoplasticity
Hello, I am using clay hypoplastic umat code and trying to verify the code with the simulation on the paper of Prof. Masin. I found in the paper (Masin, 2005, […] -
Transient Dynamic analysis (U-P formulation)
Hi everyone, i want to carry out some transient dynamic analysis. as far as I know, dynamic steps in abaqus does not allow for pore pressure build-up and dissipation, and […] -
Hypoplastic model for thermal cycles (Abaqus)
Dear all, I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented. In the Abaqus input file I have added the two lines necessary to […]
Who is Online
Supporting Organisations
Recent posts
-
Abaqus RITSS with hypoplastic 9.4.2025
-
Fellin UMAT subroutine 2.4.2025
-
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
-
Abaqus RITSS methon for LDFE analysis with hypoplastic 17.3.2025
-
Request for VUMAT Implementation of Mohr-Coulomb, Drucker-Prager, or Drucker-Prager Cap 28.2.2025
-
Suggestions for an Advanced Constitutive Model in FEM-Based Dynamic Slope Stability Analysis 12.2.2025
-
Hardening Soil or Hardening Soil-Small umat in Abaqus 2.1.2025
-
hypoplastic interface 11.12.2024
-
Triaxial Test Driver SANISAND 30.10.2024
-
REQUEST FOR EXPRESSIONS OF INTEREST (REOI) FOR PROJECT IN CONSTITUTIVE MODELLING 23.10.2024
-
Programme of the ALERT Olek Zienkiewicz school on Constitutive Modelling of Geomaterials, February 3 to 7, 2025, Prague, Czech Republic 11.10.2024
-
Connecting remote sensors to the Plaxis FEM 3D using python 26.7.2024
Yes