Everyone is invited to join our annual event “Prague Geotechnical Days”. As always, interesting programme has been assembled this year, including the 27th Prague Geotechnical Lecture by Prof. Dr.-Ing. Rolf […]
Hello all, Could you please anyone provide me umat for Hypoplastic model that used as subroutine in Abqus 6.14. With Best Regards Naif Mohammed
Hi All, Tochnog Professional now has an EasyTochnog extension, see http://www.tochnogprofessional.nl/easy_tochnog/page.php. With simple input data like pile diameter, pile length, slope geometry, sheet pile data, etc. a complete Tochnog Professional […]
We are pleased to announce the release of DIANA 10.3, check out our Release Page to see all the new features, or to sign up for our webinar and/or course. […]
Dear Prof. David Mašín I am posting the queries I have emailed you as per your advice to post it here. During calibration for the basic hypoplasticity parameters using the […]
Hi, I wanted to ask if the variables/parameters defined in the online Hypoplastic model manual for PLAXIS (https://web.natur.cuni.cz/uhigug/masin/plaxumat/node6.html) are the same for the ABAQUS UMAT?
Prof. David Masin, I am posting the queries I have emailed you earlier which you have answered and therefore I am posting it here as per your request. I wish […]
At the very interesting workshop on soil cyclic behaviour at NGI, Norway, February this year, we had a dsicussion on building a database of soil parameters for different constitutive models […]
Book “Modelling of soil behaviour on hypoplasticity” has been published
||Constitutive Modelling|1 |
Hardcopies of my new book “Modelling of Soil Behaviour with Hypoplasticity – Another Approach to Soil Constitutive Modelling” just arrived. The book is available for hardcover or pdf orders at https://www.springer.com/us/book/9783030039752
Hi All, Starting from Saturday January 26 2019 the Tochnog Professional page moves to http://www.tochnogprofessional.nl Best, Dennis Roddeman
Hi Everybody, I would like to ask an error problem where I am getting while using Plaxis 3D tunnel V 1.2. Previously I was using the software with Windows 7 […]
Dear all, I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented. I have done some runs for an axisymmetrical model for a single energy […]
Dear all, I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented. In the Abaqus input file I have added the two lines necessary to […]
Hello everyone, Could you please anyone tell me that how I can define the hypoplastic constitutive model for granular soil in ABAQUS 6.13. With Regards, Naveen.
Dear all I have some laboratory test of Pescara sand and I’m trying to find the von Wolffersdorff parameters of this sand. So I have used ExCalibre with the data […]
I have just returned to Springer proofs of my new book “Modelling of Soil Behaviour of Hypoplasticity – Another Approach to Soil Constitutive Modelling“. It will probably still take few […]
Hi everyone, i am trying to write umat subroutine for multi yield surface plasticity model.if its possible give me some information to do my project better and if some body […]
Hello, I am performing calibration trials for the hypoplastic sand model with the aid of ExCalibre and i was wondering how the deviatoric stresses q for the triaxial test input […]
ALERT Geomaterials (The Alliance of Laboratories in Europe for Education, Research and Technology) is a European organisation including 33 Universities or Organisations, which are most active in the field of numerical […]
Constitutive Model for clayey sand Soils Considering the Effect of Intergranular Physicochemical Forces
||Constitutive Modelling|0 |
Hi all, I’m doing some experimental work to investigate the salinity effect on clayey sand behaviour. Is there any constitutive model considering the physicochemical forces for such materials? Regards, Mehdi
The ITA-AITES Czech Tunnelling Association cordially invites you to 14th International Conference entitled “Underground Construction Prague 2019”, which will be held in Prague, the capital of the Czech Republic, June […]
Difficulties in calibration of triaxial test on Hochstetten sand by sand Hypoplasticity model
||Constitutive Modelling|2 |
“A hypoplastic relation for granular materials with a predefined limit state surface” paper by P. A. Von Wolffersdorff April 1996 include a triaxial test result of sample 10cm diameter and […]
Interface to study soil-structure interaction in Plaxis 3D (Clay Hypoplasticity)
||Finite Elements|6 |
Hello, I am trying to simulate the behavior of helical anchors (also called screw anchors) using PLAXIS 3D and a clay hypoplasticity constitutive model. The helical anchor shaft is simulated […]
The 2014 Masin hypoplasticity for clays has been implemented in Tochnog Professional under guidance of Dr. David Masin. This implementation includes structure, intergranular strains and visco effects. Extensions to the […]
Website editing capability for SoilModels members! SoilModels members can now edit website content associated with their accounts. While this change will be hardly noticeble to website visitors at the first […]
Messaging system has just been launched at SoilModels, so that SoilModels Members cant contact each other without a need for the system to reveal email addresses (they are never revealed). […]
An authorship of SoilModels database items has been updated so that real contributors are now indicated as authors, not the SoilModels admin. This gives more credit to our contributors. We […]
Greetings i used interface Vumat with Umat for simulating CEL problem, after 50% of analysis, i got the error as “Excessive incremental rotation of the elements in element set ” […]
SoilModels Publication Database including Mohr (1900) paper defining Mohr-Coulomb model
||SoilModels News|0 |
Publication Database has just been launched at SoilModels. Its aim is to collect papers, theses or presentations associated with constitutive models available in Constitutive Model Database. These papers will also […]
Hi everyone, I’m trying to simulate a triaxial test by using Matlab, adopting the sand hypoplasticity model with strain softening but so far couldn’t succeed. Would anyone help me with […]
The constitutive models PM4Sand (Boulanger and Ziotopoulou 2017) and PM4Silt (Boulanger and Ziotopoulou 2018) for plane-strain earthquake engineering applications for sands, and clays and low-plasticity silts respectively are now available […]
Hi Everyone! I am a research Intern at Laval University, my project is about the effect of soil structure interaction on the seismic design of Geostructures. Exactly we want to […]
Hello, I read the research report and the FORTRAN code available at https://soilmodels.com/download/vumat_umatinterface-zip/. It sounds quite interesting but I have a couple of questions about the FORTRAN code: 1- Did […]
Hi, I just came across some problems with the implementation of the “Sand Hypoplasticity Model” in Plaxis. I wanted to to perform a simulation of an oedometer test on a […]
Hi all, I have been trying to code the PM4SAND model for several months, but I faced some problems. I was wondering if there is anyone who worked with this […]
Hi there, I’ve used successfully used SANISAND .dll with Plaxis 2016, but after switching to 2017 and now 2018 the .dll seems not to work (the parameter fields appear without […]
On behalf of the team of developers I am happy to announce that, after more than four years of development and testing, ExCalibre has just been launched. ExCalibre is a […]
Sir, As a beginner of FRIC I am facing some difficulties to implement it. The downloaded FRIC code has been added to my pile soil friction model and trying to […]
The equations for a vertical cut in cohesive material are given in several publications including Heyman (1973): The stability of a vertical cut (see attachment Equations1.jpeg) and Verruijt (2001) Soil […]
1. Download install exe (32 or 64 bit) from https://cygwin.com/install.html 2. Choose a mirror site / click Next and select all packages you need for compiling: Type: “gcc” into search […]
A PhD-level course on hypoplastic constitutive modelling intended for both academia and practitioners.
Hypoplastic Interface Model: Virtual Shear Zone Thickness and Surface Rougness Coefficient
||Constitutive Modelling|9 |
Hello, I want to use Hypoplastic Interface (Fric Subroutine) in my ABAQUS contact models. However, I don’t know how I can determine Virtual Shear Zone Thickness. It is the Parameter […]
Multilaminate model (Schädlich, Schweiger and coworkers) is now available for download as Plaxis UsrMod. Thanks to Helmut Schweiger and coworkers from Graz University of Technology, Institute of Soil Mechanics, Foundation Engineering and Computational […]
Hypoplasticity (sand and clay models) is now available for GeoSlope SIGMA/W finite element code in a form of user defined Add-In. The implementation is based on ABAQUS umats and it […]
Dear colleagues, I want to ask your help — does anyone know where we can find all the test data from the old Velacs Project? If so, that would be […]
Hello, I am trying to implement the dll for hypoplasticity in Plaxis 3D. It runs through both the Initial Phase and a Nil Step. However, when it calculates about 20 […]
Dear all I am trying to calibrate the HP for sand, and I have quite comprehensive data. but they are not totally consistent with each other . we have the […]
I would like to derive material parameters based for a simulation which will implement the hypoplastic material model based on the following information: • Heavily overconsolidated • Very dense, fine […]
Supporting Organisations
Recent posts
-
Problem in “Hoek Brown Softening” Model 30.4.2026
-
XFEM Hydraulic Fracturing in Abaqus – Pore Pressure Not Updating & Extremely Small Time Steps 28.4.2026
-
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
-
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
-
Problem with GeoStudio (Seepage) software 16.2.2026
-
Prague Geotechnical Days 2026 3.2.2026
-
Postdoctoral position at COFS, UWA 28.7.2025
-
Hypoplasticity clay in ABAQUS 23.7.2025
-
Drucker-Prager Cap 29.5.2025
-
Abaqus RITSS with hypoplastic 9.4.2025
-
Fellin UMAT subroutine 2.4.2025
-
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
Recent Comments