If you want to share some material for download at SoilModels with the others such as the presentations in this post: Presentations on hypoplasticity applications, D. Mašín, NGI 2017 please […]
Based on some requests, I share here two presentations on hypoplasticity applications. One is related to simulation of various boundary value problems, the other focuses on simulation of cyclic and […]
The Tochnog Professional finite element program is now available as free version with 100 elements. It can be downloaded without registration from http://www.tochnogprofessional.nl. Several commercial and free pre- and postprocessors […]
The ALERT Olek Zienkiewicz Winterschool 2018 on Natural versus compacted clayey soils: from micro to macro behaviour and modelling will be held from 5th to 9th of November 2018 in […]
A new element test driver named “Triax” has been included into the list of calibration software available at https://soilmodels.com/triax including source code and pre-compiled Windows and Linux executables. I have been using […]
Calculation of coordinates of climbing formwork using hypoplasticity and pressuremter tests
||Finite Elements|0 |
Our article published in the latest issue of Ground Engineering 10/2017. Great combination of cone-pressueremeter-testing (CPM) by FUGRO and advanced 3D Fem modelling by GEOLINK using hypoplastic constitutive equations to […]
At the following link, you may find a short presentation on SoilModels from the ICSMGE conference in Seoul, Korea, September 2017. Please feel free to distribute the presentation among your […]
Two new umats are available now at SoilModels, thanks to Wolfgang Felling of the University of Innsbruck. These umats use different integration scheme compared with the other sand hypoplastic umats. […]
Dear collagues and friends, SoilModels has been around for 10 years now. Though we found the project succesfull in disseminating advanced material models in geotechnical engineering, we still see it […]
Supporting Organisations
Recent posts
-
Postdoctoral position at COFS, UWA 28.7.2025
-
Hypoplasticity clay in ABAQUS 23.7.2025
-
Drucker-Prager Cap 29.5.2025
-
Abaqus RITSS with hypoplastic 9.4.2025
-
Fellin UMAT subroutine 2.4.2025
-
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
-
Abaqus RITSS methon for LDFE analysis with hypoplastic 17.3.2025
-
Request for VUMAT Implementation of Mohr-Coulomb, Drucker-Prager, or Drucker-Prager Cap 28.2.2025
-
Suggestions for an Advanced Constitutive Model in FEM-Based Dynamic Slope Stability Analysis 12.2.2025
-
Hardening Soil or Hardening Soil-Small umat in Abaqus 2.1.2025
-
hypoplastic interface 11.12.2024
-
Triaxial Test Driver SANISAND 30.10.2024
Recent Comments