Hello All,
I am getting started with implementing UMAT for soil model in ABAQUS. I am planning to use Hypoplastic clay constitutive soil model to simulate the triaxial tests.
I have been using the examples of the CD triaxial tests from the book – ‘Applied Soil Mechanics with ABAQUS Application’ and using inbuilt soil models in ABAQUS to understand the FEM modeling aspects of a triaxial test, for eg., boundary conditions to be applied, geometry of the model etc.
To start using the hypoplastic clay model, I downloaded the UMAT files from Prof. Masin from : https://soilmodels.com/download/plaxis-umat-hypoplas-zip/
I would like to get suggestions for getting started with using UMAT for Hypoplastic clay model in ABAQUS, after downloading it, like references or tutorials to implement this UMAT in ABAQUS. Also, if anyone can suggest or share ABAQUS files with this soil model implemented, then I would like to check it out.
Thanks!
Kanika
Getting started with UMAT for Hypoplastic clay model in ABAQUS
Related Articles
-
Shear Stiffness Calculation for Hypoplastic Model
Hashmi Sohawon||Constitutive Modelling|4 |
Views 3,996
Hi David, I have reproduced some single elements test on ABAQUS using the UMAT to compare with Triax Hypoplasticity. So far, my stiffness curve (q vs ea) and my stress […] -
Shear modulus degragation
Baban Bapir||Constitutive Modelling|1 |
Views 4,458
Hello all, I am using the clay hypoplsticity model in Abaqus. As shown in the picture, I have to construct the stiffness desegregation curve to calibrate the R value. Can […] -
Cyclic Behavior of Sand
MOHD SAQIB||Constitutive Modelling|3 |
Views 3,791
Hello, Is there any constitutive model for sand which can simulate the number of cycles to reach the critical state. I used the SANISAND model but it is not promising. […] -
Calibration the UMAT sand hypoplastic parameters
aysar hassan||Constitutive Modelling|3 |
Views 3,875
Dear all, I’m facing trouble in calculating NO. 16 parameter in the UMAT for sand hypoplasticity by Dr. Masin, any help will be really appreciated especially with an example. Best […] -
Regarding FRIC : As a beginner
Arun C||Constitutive Modelling|1 |
Views 4,029
Sir, As a beginner of FRIC I am facing some difficulties to implement it. The downloaded FRIC code has been added to my pile soil friction model and trying to […] -
Hypoplastic sand-mr parameter calibration
anis kheffache||Constitutive Modelling|2 |
Views 3,928
Dear all, I have a question about Hypoplasticity for sand model, i am having trouble to understand about how to calibrate the mr parameter ? Since no formula is provided […] -
ExCalibre Automatic Calibration
Marco Hofer||Constitutive Modelling|5 |
Views 3,997
Hello all, i have another question regarding the calibration process. Why do the initial void ratios differ between the input file and the output from excalibre? What is done during […] -
Question on the Matlab driver-hypoplastic models
c sx||Constitutive Modelling|5 |
Views 3,805
Dear all, After carefully reading the matlab drivers of hypoplastic models, I was wondering why there is not mix control undrained TX compression. I want to achieve the same result […]
0 Comments
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
-
BCV bentonite experimental and modelling datasets 14.11.2023
-
Challenges in simulating geomechanical models using Mohr-Coulomb with Tension Cut-Off in Abaqus 20.10.2023
-
Analys soil liquefaction with Abaqus under blast load 19.10.2023
-
Hardening soil Model UMAT 13.9.2023
-
Problem with VUMAT interface 20.8.2023
-
UMAT and oneAPI compiler issues. (SOLVED…i hope :p) 5.8.2023
-
Oedometric Test Soil Test Plaxis 21.7.2023
-
Problem in simulating CPT using SANISAND04 10.7.2023
-
Problem with UMAT for clay hypoplasticity. Program exiting. 30.6.2023
-
Example of FLAC3D data file 10.6.2023
-
sigini ans sdvini subroutine example for soil model in Abaqus 6.6.2023
-
Presentations from Prague Geotechnical Days 2023 including 29th Prague Geotechical Lecture by Yannis Dafalias 25.5.2023
Recent Comments
- Johan Clausen on Challenges in simulating geomechanical models using Mohr-Coulomb with Tension Cut-Off in Abaqus
- Zhenyu Liu on Problem in using Hypoplastic model for sand in Abaqus.
- Dorsa Shadlou on SANISAND for FLAC3D Download
- Shuo Feng on Download Package of Matlab Driver
- Ajay Jatoliya on SANISAND for FLAC3D Download
- Isma Khabis on Hardening soil Model UMAT
- Anis Kheffache on Hardening soil Model UMAT
- Isma Khabis on Hardening Soil Model in Abaqus
- Fatemeh Safari on Matlab Driver
- KF JIAO on SANISAND Abaqus UMAT and Plaxis implementations
- Abdiel Ramon Leon Bal on Problem in simulating CPT using SANISAND04
- An Zhanng on Problem in simulating CPT using SANISAND04
- Giovanni Ciardi on UMAT and oneAPI compiler issues. (SOLVED…i hope :p)
- Anis Kheffache on UMAT and oneAPI compiler issues. (SOLVED…i hope :p)
- Giovanni Ciardi on UMAT and oneAPI compiler issues. (SOLVED…i hope :p)
- Anis Kheffache on UMAT and oneAPI compiler issues. (SOLVED…i hope :p)
- Giovanni Ciardi on UMAT and oneAPI compiler issues. (SOLVED…i hope :p)
- Anis Kheffache on UMAT and oneAPI compiler issues. (SOLVED…i hope :p)