||Finite Elements|0 |
While performing drained triaxial compression tests on hypoplastic clay using ABAQUS, I observed that the specimen’s porosity remains constant. Additionally, I have questions regarding the application of the material parameter K_w. Could anyone provide clarification?
Tags: Requst
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
Problem with GeoStudio (Seepage) software 16.2.2026
Prague Geotechnical Days 2026 3.2.2026
Postdoctoral position at COFS, UWA 28.7.2025
Hypoplasticity clay in ABAQUS 23.7.2025
Drucker-Prager Cap 29.5.2025
Abaqus RITSS with hypoplastic 9.4.2025
Fellin UMAT subroutine 2.4.2025
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
Abaqus RITSS methon for LDFE analysis with hypoplastic 17.3.2025
Request for VUMAT Implementation of Mohr-Coulomb, Drucker-Prager, or Drucker-Prager Cap 28.2.2025
©2026 SoilModels
