Hi everyone,
I work on soil constitutive models and I want to compare soil behaviours with various constitutive models but I can’t find Lade umat in the .for format. Can anybody help me with where to find it?
Related Articles
-
Hypoplastic Interface Model: Does anybody implemented this model in FLAC3D
I want to use this model to simulate soil-structure interaction in FLAC3D software, so I was wondering does anybody implemented this model in FLAC3D, and could you please share your […] -
Non convergence problem in abaqus using hpoeca Clay Hypoplasticity in slope model
hello everyone! based on the strength reduction method in clay hypoplasticity, firstly, I used two steps belong to the static_general, the first step is impose a gravity load, and not […] -
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface
Hi, I have a very basic question. I wanted to compare 2D vs 3D Mohr Coulomb yield surface. I believe the 2D yield surface is part of 3D yield surface. […] -
How to implement this Hypoplastic Interface Model into ABAQUS combined with the existing hypoplastic model subroutine
Hello: I’m a post-doc at the University of Nottingham, and I’m using the hypoplastic model to simulate the centrifuge tests we did. The research area is related to soil-pile interaction. […] -
Implimentation of SANISAND constitutive model in ABAQUS/Standard for a soil-monopile interaction
Dear all, I am trying to model soil-monopile interaction (3D) in ABAQUS/Standard in order to perform subsequently a cyclic and dynamic analysis. For the soil I am using the SANISAND […] -
NorSand model for cyclic triaxial testing
Hi altruists, Hope all of you are doing well. I am looking for literature on the NorSand model, which considers the drained cyclic triaxial testing behavior. I have found a […] -
Hypoplasticity & Recent Stress History
Hi David, Can you please provide some comments on the ability of the Hypoplasticity model with intergranular strain concept to model the effects of recent stress history on the clay […] -
Compatibility of subroutines in ABQ2021
Hi Admin, I have been using hypoplastic subroutine supplied by this website. It works well in ABQ6.14 and ABQ2017. However, recently I have to upgrade to ABQ2021 due to an […]
0 Comments
Supporting Organisations
Recent posts
-
SaniClay or SaniClay-RD 30.9.2026
-
Animating Soil Mechanics 3.7.2026
-
GeoXPM 19.6.2026
-
Autumn School in Soil Modelling at NTNU 16.6.2026
-
Viscohypoplastic bentonite (VIBE) model 28.5.2026
-
Problem in “Hoek Brown Softening” Model 30.4.2026
-
XFEM Hydraulic Fracturing in Abaqus – Pore Pressure Not Updating & Extremely Small Time Steps 28.4.2026
-
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
-
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
-
Problem with GeoStudio (Seepage) software 16.2.2026
-
Prague Geotechnical Days 2026 3.2.2026
-
Postdoctoral position at COFS, UWA 28.7.2025