Dear all,
I tried to find some oedometer tests result on Ticino sand in different relative densities. However, I couldn’t find any database related to this type of experiment. I appreciate it if anyone can share these types of results with me. ( Oedometer tests in which one and more than one cycles of loading and unloading is performed in various relative densities)
Sincerely yours,
Oedometer tests on Ticino sand
Related Articles
-
Guidance for a newbie
Osama Dar||Laboratory testing|4 |
Views 518
Greetings I am entirely new to soil modelling. I want to undertake a thesis on soil modelling. Currently I’ve basic understanding of soil mechanics which is taught at undergraduate level. […] -
Simulating Oedometer test in PLAXIS
Balaji Bandaru||Laboratory testing|7 |
Views 797
How do I perform oedometer test simulation in PLAXIS -
Simulating the oedometric test with Abaqus
Belgacem jellali||Laboratory testing|2 |
Views 497
I am looking for an example of the oedometric test similation with Abaqus, in particular : Load-Unload-Reload -
Issues on reading xlsx extension for calibration input data
Abdiel Ramon Leon Bal||Laboratory testing|2 |
Views 393
Dear all, I am trying to calibrate the hypoplastic parameters for the hypo sand model with ExCalibre tool, using CID for a particular sand. The moment I try to load […]
0 Comments
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
-
Zbraslav sand – Cyclic tests by Charles University 17.1.2023
-
New features in Excalibre 17.1.2023
-
Sanisand 13.1.2023
-
SaniSand Model in Plaxis 3D 9.12.2022
-
The GA-cal software for the automatic calibration of soil constitutive laws 2.12.2022
-
Abaqus OneAPI Compiler 10.11.2022
-
Few more Question on calculating lateral displacement of pile using hypoplastic clay model 3.10.2022
-
A question about the hypoplastic model in clay 22.9.2022
-
A High-Cycle Accumulation Model for Sand (Niemunis et al., 2005) 6.9.2022
-
Malaysian kaolin – Cyclic tests by Charles University 5.9.2022
-
Problem in calculating Lateral displacement of the pile using Hypoplastic clay model 2.9.2022
-
GTS NX 25.7.2022
Recent Comments
- Shruthija Sreeram on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Paul Le Roux on Zbraslav sand – Cyclic tests by Charles University
- Amrane Moussa on Download package of a complete dataset “Zbraslav sand – Cyclic tests by Charles University”
- Francisco Mendez on The GA-cal software for the automatic calibration of soil constitutive laws
- Abolfazl Najafi on The GA-cal software for the automatic calibration of soil constitutive laws
- Arie Koot on SaniSand Model in Plaxis 3D
- Sajjad Shakeri on UDSM PLAXIS
- Anis Kheffache on Abaqus OneAPI Compiler
- Kassem Dib on How can I solve the error in Abaqus mentioned below?
- Dimitrios Konstantinidis on Issues in getting the negative values of q (mean deviatoric stress) while simulating cyclic triaxial test in ABAQUS using SANISAND subroutine.
- Tomáš Kadlíček on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Safia EDAOUDI on Simulating Oedometer test in PLAXIS
- Safia EDAOUDI on Simulating the oedometric test with Abaqus
- MOHD SAQIB on Issues in getting the negative values of q (mean deviatoric stress) while simulating cyclic triaxial test in ABAQUS using SANISAND subroutine.
- Dimitrios Konstantinidis on Issues in getting the negative values of q (mean deviatoric stress) while simulating cyclic triaxial test in ABAQUS using SANISAND subroutine.
- Guilherme Castro on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Giada Orlando on Download Package for Hypoplastic interface model and UMAT – FRIC interface
- Paul Le Roux on PM4Sand and PM4Silt models available