A new PhD position in experimental soil mechanics is open at Charles University.
Starting date October 2020, topic: Evaluation of hydromechanical properties of bentonite subjected to thermal loading.
Further information on this position can be found at: https://stars-natur.cz/phd-positions/geology/evaluation-of-hydromechanical-properties-of-bentonite-subjected-to-thermal-loading?back=nibtu
Related Articles
-
-
PHD Position on “Triggering and propagation of liquefaction in brittle geotechnical materials” at CIMNE-UPC (Barcelona, Spain)
3 year fully funded PhD. Application deadline: 31st May 2021 Liquefaction of brittle geotechnical materials (such as hydraulic fills, mine tailings, landfills and sensitive or quick clays) causes catastrophic failures […] -
Post-doc position in energy geotechnics at Aarhus University
Applications are welcome for a 1.5-year postdoc position (with extension opportunities) to investigate the cyclic behaviour of a geomembrane energy storage system. The successful candidate will investigate the cyclic behaviour […] -
PhD position on thermo-hydro-mechanical coupling in slope stability (Charles University)
A second PhD position in soil mechanics is available at Charles University. Topic: Effects of thermo-hydro-mechanical coupling on slope deformation in expansive clays: advanced experiments and hypoplastic modelling. Starting date: […] -
-
-
Two postdoctoral positions in computational mechanics in Ben Gurion university and Ariel university, Israel, are available immediately
Two postdoctoral positions are available in Israel for one year, with the possibility of renewal for up to three years. The projects will be conducted in AU and BGU, under […]
0 Comments
Supporting Organisations
Recent posts
-
Vibration foundation behavior 16.10.2021
-
Getting started with UMAT for Hypoplastic clay model in ABAQUS 15.10.2021
-
consistent tangent stiffness calculation in hypoplasticity sand UMAT 7.10.2021
-
stress order in hypo umat seems to be incorrect 6.10.2021
-
ALERT doctoral school on constitutive modelling – hands on session triax input files 2.10.2021
-
Initial Stiffness of CU test in Masin’s 2014 Model 29.9.2021
-
CONSTUTUTIVE MODELLING 22.9.2021
-
Compatibility of subroutines in ABQ2021 17.9.2021
-
Hypoplasticity sand convergence issues 17.9.2021
-
MATLAB Code for Bounding Surface Plasticity Model 17.9.2021
-
Non convergence problem in abaqus using hpoeca Clay Hypoplasticity in slope model 16.9.2021
-
UMAT file for POROELASTICITY 31.8.2021