Hello All, I am trying to simulate the seismic liquefaction in Abaqus. Can you please help me to model this.
Best Regards’
Saqib
||Finite Elements|2 |
||Finite Elements|2 |
Related Articles
-
Boundary Conditions of Masin 2005 Paper for clay hypoplasticity
Hello, I am using clay hypoplastic umat code and trying to verify the code with the simulation on the paper of Prof. Masin. I found in the paper (Masin, 2005, […] -
-
Modelling cyclic loads in Tochnog
Dears all, I am using Tochnog professional software to model undrained cyclic triaxial test for behaviour and liquefaction studies. Is there an incremental driver model to execute for compressional cyclic […] -
hypoplasticity models in free Tochnog Professional
In this post we will list built-in hypoplasticity formulations in the free Tochnog Professional program. Since these hypoplasticity options are built-in there is no need to link external umat routines. […] -
new hypoplasticity laws in Tochnog Professional
The 2014 Masin hypoplasticity for clays has been implemented in Tochnog Professional under guidance of Dr. David Masin. This implementation includes structure, intergranular strains and visco effects. Extensions to the […] -
Presentations on hypoplasticity applications, D. Mašín, NGI 2017
Based on some requests, I share here two presentations on hypoplasticity applications. One is related to simulation of various boundary value problems, the other focuses on simulation of cyclic and […] -
Geostatic method for Abaqus/Explicit
Dear all, I recently conducted a numerical simulation of pile-soil interaction. I digged a vertical hole and insert the pile into that with general contact. Due to many reasons, I […] -
HP clay subroutine in Plaxis
Dear Prof. Masin and Soil Model Community, I am using HP clay subroutine in Plaxis 3D to simulate soil structure interaction problem. I want void ratio and OCR variation along […]
Supporting Organisations
Recent posts
-
Connecting remote sensors to the Plaxis FEM 3D using python 26.7.2024
-
Intergranular Strain Extensions 16.7.2024
-
Abaqus Hypoplasticity Primary Variable Is Not Available 1.7.2024
-
Vumat to calculate excess pore in Coupled Eulerian-Lagrangian ABAQUS 1.7.2024
-
Drucker Prager Cap Hardening Model 20.6.2024
-
Soil model for sand under drained cyclic loading 15.6.2024
-
In Abaqus how do we use *DLOAD for defining both user-defined pressure and body force simultaneously? 15.6.2024
-
Issue in applying SANISAND04 UMAT to Boundary-Value-Problem 31.5.2024
-
Triaxial compression test using Mohr-Coulomb model in Abaqus 27.5.2024
-
The Mises stress calculated by the hypoplasticity model considering the intergranular strain is all 0 20.5.2024
-
Degradation ( disturbance ) of hypoplastic clay 23.4.2024
-
Degradation ( disturbance ) of hypoplastic clay 23.4.2024
What do you want to model?
a big soil block with signal at bottom and boundary conditions at bottom and sides?
a triaxial test?
a shear test?
I want to simulate the liquefaction phenomenon on a soil block. Not either traixial or shear test.