Dear all, does anyone have the umat code for Hardening Soil or Hardening Soil-Small in Abaqus? For my current work I need a umat for Hardening Soil or Hardening Soil-Small […]
I have a question regarding the simulation of cone penetration tests using the SANISAND04 model. I have observed that the parameter m (yield surface size）has a significant impact on the […]
Few more Question on calculating lateral displacement of pile using hypoplastic clay model
||Finite Elements|0 |
Dear Professor David, Thank you very much for your previous clarification. its really helps. In continuation to my previous , there are few more question, i want your kindself to […]
Problem in calculating Lateral displacement of the pile using Hypoplastic clay model
||Finite Elements|4 |
Hy Professor David, I am trying to verify the result of one of your paper by the title ‘Cyclic lateral response and failure mechanisms of semi-rigid pile in soft clay: […]
Hi altruists, Hope all of you are doing well. I am looking for literature on the NorSand model, which considers the drained cyclic triaxial testing behavior. I have found a […]
Dear Altruists, I just wanted to learn the bounding surface plasticity theory with coding. Does anyone have any code (written in MATLAB) for the Bounding Surface Plasticity model? Could you […]
Supporting Organisations
Recent posts
-
Problem in “Hoek Brown Softening” Model 30.4.2026
-
XFEM Hydraulic Fracturing in Abaqus – Pore Pressure Not Updating & Extremely Small Time Steps 28.4.2026
-
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
-
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
-
Problem with GeoStudio (Seepage) software 16.2.2026
-
Prague Geotechnical Days 2026 3.2.2026
-
Postdoctoral position at COFS, UWA 28.7.2025
-
Hypoplasticity clay in ABAQUS 23.7.2025
-
Drucker-Prager Cap 29.5.2025
-
Abaqus RITSS with hypoplastic 9.4.2025
-
Fellin UMAT subroutine 2.4.2025
-
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
Recent Comments