Dear All,
you can find a list with some of Tochnog Professional capabilities and application papers at: http://www.tochnogprofessional.nl/Tochnog_Professional_wikipedia_format.pdf
Stay safe, Dennis Roddeman
||Finite Elements|0 |
||Finite Elements|0 |
Related Articles
-
hypoplasticity models in free Tochnog Professional
In this post we will list built-in hypoplasticity formulations in the free Tochnog Professional program. Since these hypoplasticity options are built-in there is no need to link external umat routines. […] -
Tochnog Professional overview movie in youtube
Dear All, We posted a small overview movie of Tochnog Professional in YouTube. For more movies see the complete channel. -
Tochnog Professional becomes free
After several decades of development we are happy to announce that the Tochnog Professional finite element program has become free. Both for academic and commercial use. We are extremely grateful […] -
DIANA 10.4 released with full Geotechnical possibilities 3D as always, but now also 2D!
We are pleased to announce that DIANA 10.4 is released with full 2D geotechnical possibilities. DIANA is already easy to use for full 3D geotechnical models, and now the more […] -
Slope stability calculation with hypoplasticity using phi-c reduction available now in download section
The strength reduction method in clay hypoplasticity now available -
Problem with Hypoplastic Vumat use with CEL in Abaqus
Hello all, I am currently working on the FE modeling of anchors installation into the soil using the CEL analysis in Abaqus. I tried to use the hypoplastic vumat for […] -
Small displacements when using HP model in Plaxis 3D
I am modelling sand slopes in Plaxis 3D using an HP model. I am using soil parameters from “Modelling of Soil Behaviour with Hypoplasticity” by David Masin (2019). During the […] -
An error in the SANISAND umat runtime
Dear all I was simulating a pile in a fully drained soil subjected to horizontal loads using ABAQUS (as shown in Figure 1) and noticed from the monitor that the […]
0 Comments
Supporting Organisations
Recent posts
-
hypoplastic interface 11.12.2024
-
Triaxial Test Driver SANISAND 30.10.2024
-
REQUEST FOR EXPRESSIONS OF INTEREST (REOI) FOR PROJECT IN CONSTITUTIVE MODELLING 23.10.2024
-
Programme of the ALERT Olek Zienkiewicz school on Constitutive Modelling of Geomaterials, February 3 to 7, 2025, Prague, Czech Republic 11.10.2024
-
Connecting remote sensors to the Plaxis FEM 3D using python 26.7.2024
-
Intergranular Strain Extensions 16.7.2024
-
Abaqus Hypoplasticity Primary Variable Is Not Available 1.7.2024
-
Vumat to calculate excess pore in Coupled Eulerian-Lagrangian ABAQUS 1.7.2024
-
Drucker Prager Cap Hardening Model 20.6.2024
-
Soil model for sand under drained cyclic loading 15.6.2024
-
In Abaqus how do we use *DLOAD for defining both user-defined pressure and body force simultaneously? 15.6.2024
-
Issue in applying SANISAND04 UMAT to Boundary-Value-Problem 31.5.2024