I have the license, but can’t login as it is a server license. In order to access this model, i need the .dll file. Can anyone help me with this.
Link-https://communities.bentley.com/products/geotech-analysis/w/plaxis-soilvision-wiki/46106/udsm—creep-sclay1s
Related Articles
-
Abaqus user defined field
Hi, I am going to use the usdfld to function the density of sand changing due to confining pressure. I am not sure Abaqus will call the usdfld for every […] -
Intergranular strain concept modification
Hi all Just a short question on the modification of the intergranular strain concept proposed by Wegener & Herle (2014) to limit strain accumulation. In terms of the numerical implementation […] -
Question on the Matlab driver-hypoplastic models
Dear all, After carefully reading the matlab drivers of hypoplastic models, I was wondering whether the driver can simulate triaxial extension tests. As I change the constraints to reflect triaxial […] -
Undrained Tests with Clay Hypoplasticity Intergranular
Hi all, I wanted to share these results to show that the use of the hypo clay model does in fact give more realistic undrained stress paths for clays on […] -
-
Combining Hypoplastic-sand and Hypoplastic-clay in one UMAT file
Hi everyone, i have combined both Hypoplastic sand and clay umats in one umat ( to use for example in the case of multilayered soil medium made of clay and […] -
ExCalibre Automatic Calibration
Hello all, According to my last post some weeks ago I now have translated the laboratory data from engineering strain to true strain with the following formula: epsilon(true)=ln(1+epsilon(engineering)). I compared […] -
Problem with SANISAND UMAT
Hello all, I’m using the SANISAND UMAT I downloaded here for my research, the problem I found is it gives me wrong results in ABAQUS and INCREMENTAL DRIVER for element […]
Who is Online
Supporting Organisations
Recent posts
-
Buy Imcivree (Setmelanotide) Online USA 14.8.2026
-
Buy Imcivree (Setmelanotide) Online USA & Reduce Excess Body Weight | Eazmeds.com 14.8.2026
-
Buy Tramadol Online | Eazmeds.com | 24 Hrs Delivery 9.8.2026
-
Animating Soil Mechanics 3.7.2026
-
GeoXPM 19.6.2026
-
Autumn School in Soil Modelling at NTNU 16.6.2026
-
Viscohypoplastic bentonite (VIBE) model 28.5.2026
-
Problem in “Hoek Brown Softening” Model 30.4.2026
-
XFEM Hydraulic Fracturing in Abaqus – Pore Pressure Not Updating & Extremely Small Time Steps 28.4.2026
-
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
-
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
-
Problem with GeoStudio (Seepage) software 16.2.2026
Hi Balaji
The correct link to the Creep SCLAY-1S page is:
https://communities.bentley.com/products/geotech-analysis/w/plaxis-soilvision-wiki/46106/udsm—creep-sclay1s
And since the latest versions, starting PLAXIS CE V20 (Jan 2020) the User Defined Soil models that are developed by, or in cooperation with, the PLAXIS team, are delivered with the installation.
You would need to use an updated version, as the interaction with the main PLAXIS calculation kernel requires a recent version.
Kind regards,
Micha van der Sloot
PLAXIS | Bentley Systems