Change your cover photo Upload Change your cover photoUpload Apply Cancel Change your cover photo Hans Henning Stutz This user account status is Approved followers13 following11 Follow Message About About Posts Posts Comments Comments Dear Ruibin, I did not have much experience with this kind of problems, but so far… On liquefaction simulation with abaqus Dear Naif, Please check: https://soilmodels.com/hypointerface/ Regards, Hans Henning Stutz On Hypoplastic Interface Model: Virtual Shear Zone Thickness and Surface Rougness Coefficient Dear Mahmoud, If you only use the Umat in the Materials use only 22 parameters, if… On Hypoplastic Interface Model: Virtual Shear Zone Thickness and Surface Rougness Coefficient Dear Mahmoud, This means the subroutine (FRIC) can be only used in 3D simulations (no… On Hypoplastic Interface Model: Virtual Shear Zone Thickness and Surface Rougness Coefficient Dear Hashmi, Basically yes, the most of the input you can see that it is identical… On Clay Hypoplastic Model ABAQUS UMAT Dear Chiara, Maybe you could post the definition of the parameter input and the state variables.… On Hypoplastic model for thermal cycles (Abaqus) Dear Manuel, it should be (sig1-sig3) to my knowledge. Best regards,… On ExCalibre – Definiton of q Dear Leon, I think you should proceed as David mentioned. I was only thinking if you… On Interface to study soil-structure interaction in Plaxis 3D (Clay Hypoplasticity) Dear Leon, I have a short question, what do you assigned as parameters for the Mohr-Coulomb… On Interface to study soil-structure interaction in Plaxis 3D (Clay Hypoplasticity) Dear Phuor, you can write me a message. Best regards, Hans Henning On Hypoplastic Interface Model (Stutz et al., 2016) load more comments SoilModels LoginIf you want to remain signed-in after you leave the browser, please use Username & Password login option. Sign in with Google Sign in with LinkedIn Username or E-mail Password Only fill in if you are not human Keep me signed in Register Forgot your password?