Implementation (umat.for) of a model published in Mugele, L., Stutz, H. H. and Mašín, D. (2024). Generalized intergranular strain concept and its application to hypoplastic models. Computers and Geotechnics 173, September 2024, 106480.
Download package of Clay and Sand hypoplasticity UMAT and Plaxis implementations, including pre-compiled UMAT-Plaxis interface.
Kadlíček, T., Ochmański, M., Mašín, D. and Duque, J. (2022) Report on Charles University implementation of high cycle accumulation model
||1 |
Kadlíček, T., Ochmański, M., Mašín, D. and Duque, J. (2022) Report on Charles University implementation of high cycle accumulation model
Clay and Sand hypoplasticity UMAT and Plaxis implementations, including UMAT-Plaxis interface
||26 |
Download package of Clay and Sand hypoplasticity UMAT and Plaxis implementations, including pre-compiled UMAT-Plaxis interface.
Supporting Organisations
Recent posts
-
Problem in “Hoek Brown Softening” Model 30.4.2026
-
XFEM Hydraulic Fracturing in Abaqus – Pore Pressure Not Updating & Extremely Small Time Steps 28.4.2026
-
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
-
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
-
Problem with GeoStudio (Seepage) software 16.2.2026
-
Prague Geotechnical Days 2026 3.2.2026
-
Postdoctoral position at COFS, UWA 28.7.2025
-
Hypoplasticity clay in ABAQUS 23.7.2025
-
Drucker-Prager Cap 29.5.2025
-
Abaqus RITSS with hypoplastic 9.4.2025
-
Fellin UMAT subroutine 2.4.2025
-
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
Recent Comments