Hi Everyone.
I am new to this Platform.
I want to use the hypoplastic model in my research. how I can download it UMAT file for ABAQUS software?
||Finite Elements|2 |
||Finite Elements|2 |
Related Articles
-
Skin friction along depth of pile
Dear all, I am simulating static pile load test in the rock by using ABAQUS. For comparison of numerical results with the experimental, I need skin friction vs depth plot. […] -
EasyTochnog input file generator
Hi All, Tochnog Professional now has an EasyTochnog extension, see http://www.tochnogprofessional.nl/easy_tochnog/page.php. With simple input data like pile diameter, pile length, slope geometry, sheet pile data, etc. a complete Tochnog Professional […] -
Hypoplasticity sand convergence issues
Hi everyone, i am modeling laterally loaded monopile using abaqus, My 3d model looks like this, only half of the model is simulated, symmetry boundary conditions is applied to the […] -
Free Tochnog Professional list of capabilities and papers
Dear All, you can find a list with some of Tochnog Professional capabilities and application papers at: http://www.tochnogprofessional.nl/Tochnog_Professional_wikipedia_format.pdf Stay safe, Dennis Roddeman -
liquefaction simulation with abaqus
Hello, everyone I am an abaqus user and developer. Recently, I want to simulating the liquefaction phenomenon with abaqus/standard or abaqus/explicit. As I know, this cannot be realized using the […] -
Transient Dynamic analysis (U-P formulation)
Hi everyone, i want to carry out some transient dynamic analysis. as far as I know, dynamic steps in abaqus does not allow for pore pressure build-up and dissipation, and […] -
DIANA 10.4 released with full Geotechnical possibilities 3D as always, but now also 2D!
We are pleased to announce that DIANA 10.4 is released with full 2D geotechnical possibilities. DIANA is already easy to use for full 3D geotechnical models, and now the more […] -
sigini ans sdvini subroutine example for soil model in Abaqus
Dear all, I’m looking for a sigini and sdvini subroutine examples to calculate soil initial state with rest coeficient K0 method or ICP-05 method or any method available. thank you. […]
Who is Online
Supporting Organisations
Recent posts
-
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
-
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
-
Problem with GeoStudio (Seepage) software 16.2.2026
-
Prague Geotechnical Days 2026 3.2.2026
-
Postdoctoral position at COFS, UWA 28.7.2025
-
Hypoplasticity clay in ABAQUS 23.7.2025
-
Drucker-Prager Cap 29.5.2025
-
Abaqus RITSS with hypoplastic 9.4.2025
-
Fellin UMAT subroutine 2.4.2025
-
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
-
Abaqus RITSS methon for LDFE analysis with hypoplastic 17.3.2025
-
Request for VUMAT Implementation of Mohr-Coulomb, Drucker-Prager, or Drucker-Prager Cap 28.2.2025
Hi,
To download the UMATs for hypoplasticity, all you need is a soilmodels.com account and then you can download them here:
https://soilmodels.com/download/plaxis-umat-hypoplas-zip/
Kind regards,
Gertraud
Thank you for sharing.