I cannot find sanisand in the library of available constitutive models for the triaxial test driver, even if it is listed as one of the available models on the main […]
I am happy to announce that our pre-print paper, “Multi-objective analysis of the Sand Hypoplasticity model calibration”, is available on researchgate (https://www.researchgate.net/publication/369199567_Multi-objective_analysis_of_the_Sand_Hypoplasticity_model_calibration) and Axive (https://doi.org/10.48550/arXiv.2303.07234). In this work, we study […]
The GA-cal software for the automatic calibration of soil constitutive laws
||Constitutive Modelling|2 |
I am happy to announce that our pre-print paper, “The GA-cal software for the automatic calibration of soil constitutive laws: a tutorial and a user manual”, is available on researchgate […]
Hi altruists, Hope all of you are doing well. I am looking for literature on the NorSand model, which considers the drained cyclic triaxial testing behavior. I have found a […]
Dear Prof. David Mašín I am posting the queries I have emailed you as per your advice to post it here. During calibration for the basic hypoplasticity parameters using the […]
Supporting Organisations
Recent posts
-
Problem in “Hoek Brown Softening” Model 30.4.2026
-
XFEM Hydraulic Fracturing in Abaqus – Pore Pressure Not Updating & Extremely Small Time Steps 28.4.2026
-
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
-
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
-
Problem with GeoStudio (Seepage) software 16.2.2026
-
Prague Geotechnical Days 2026 3.2.2026
-
Postdoctoral position at COFS, UWA 28.7.2025
-
Hypoplasticity clay in ABAQUS 23.7.2025
-
Drucker-Prager Cap 29.5.2025
-
Abaqus RITSS with hypoplastic 9.4.2025
-
Fellin UMAT subroutine 2.4.2025
-
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
Recent Comments