I am using the mesh-to-mesh solution mapping with MCC model. The element type used is CPE8RP. My initial analysis runs without any issue and when the deformations reach a certain level, I create another mesh and use *Map Solution command to transfer variables as initial conditions to the new mesh. However, I have difficulty transferring Void ratio. Void ratios were transferred but they are not in agreement with last step of the previous analysis. In some element integration points, void ratios are zero and my analysis stops. Can some one help me to solve this issue? In the initial mesh I am using a linearly varying void ratio distribution.
ABAQUS Mesh-to-mesh solution mapping with Modified Cam Clay
Related Articles
-
Abaqus OneAPI Compiler
Kassem Dib||Finite Elements|1 |Views 7,765
Hello.. I am testing SaniSand constitutive model as published by Mr. Masin at this site. The Abaqus is V21 and the visual studio 2017 with OneAPI compiler, the Abaqus verification […] -
Consolidation analysis using HP clay model in Plaxis
muhammad shakeel||Finite Elements|1 |Views 3,979
Dear Prof David / SOil model community, I am performing coupled consolidation analysis for deep excavation in clay using HP clay model in Plaxis 3D. Performing the undrained analysis, the […] -
Special issue of Computers and Structures “Numerical simulation of multi‐physics phenomena in geotechnical structures”
David Mašín||Finite Elements|1 |Views 5,680
https://www.sciencedirect.com/journal/computers-and-structures/about/forthcoming-special-issues Numerical simulation of multi‐physics phenomena in geotechnical structures Complete and thorough analysis of geotechnical structures, requires various complex materials models with internal structures, which cannot be described by the […] -
Barodesy download package including small strain stiffness and strength reduction (UMAT and PLAXIS dll)
Manuel Bode||Finite Elements|0 |Views 3,358
A new download package for Clay Barodesy is available in the download section (https://soilmodels.com/barodesy/) The model uses the basic model of barodesy for clay (Medicus G. and Fellin W. 2017) […] -
A problem of convergence from using Hypoplastic model in Abaqus
Joe Chu||Finite Elements|5 |Views 3,671
Dear all, The sand hypoplastic model has been used to simulate the interaction between soil and pile. However, there is a bad convergence in the process of calculation. When I […] -
UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
Lovinder Mann||Finite Elements|4 |Views 3,792
Hi, I am working in Abaqus, aiming to model double porosity clay consolidation data by using hypoplastic clay model with meta stable structure. First, i just wanted to verify basic […] -
set cavitation limit in ABAQUS/STANDARD when using SANISAND umat
Zhentao Liu||Finite Elements|6 |Views 3,065
Dear all I am recently working on the mechanical characteristics of large diameter monopiles under horizontal loads.The numerical simulation part of this project was carried out in ABAQUS/STANDARD and for […] -
Small displacements when using HP model in Plaxis 3D
Arno Crous||Finite Elements|4 |Views 3,280
I am modelling sand slopes in Plaxis 3D using an HP model. I am using soil parameters from “Modelling of Soil Behaviour with Hypoplasticity” by David Masin (2019). During the […]
0 Comments
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Ramon Varghese on Hypoplastic Interface Model: Does anybody implemented this model in FLAC3D
- Jh Xue on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver