Dear all,
I am simulating static pile load test in the rock by using ABAQUS. For comparison of numerical results with the experimental, I need skin friction vs depth plot. But in ABAQUS how I get unit skin friction along with the depth of pile? I used *section print command to get the force at various locations of the pile. But the problem is I can use only one *section print command in the step. When I use multiple commands it shows error. How can I get forces at different location of pile from one analysis?
Skin friction along depth of pile
Related Articles
-
Consolidation analysis using HP clay model in Plaxis
muhammad shakeel||Finite Elements|1 |Views 3,976
Dear Prof David / SOil model community, I am performing coupled consolidation analysis for deep excavation in clay using HP clay model in Plaxis 3D. Performing the undrained analysis, the […] -
set cavitation limit in ABAQUS/STANDARD when using SANISAND umat
Zhentao Liu||Finite Elements|6 |Views 3,061
Dear all I am recently working on the mechanical characteristics of large diameter monopiles under horizontal loads.The numerical simulation part of this project was carried out in ABAQUS/STANDARD and for […] -
Vibration foundation behavior
Naif Alsanabani||Finite Elements|0 |Views 4,611
Dear all I have FEM analysis results for vibration foundation response that rested either on saturated salt-encrusted flat soil (case-1) or on finite cemented sand overlie saturated salt-encrusted flat soil […] -
problem with sanisand umat
yousef zand||Finite Elements|8 |Views 3,663
Dear all, I’m trying to model multilayer soil in abaqus. To use the SaniSand umat in model I use the following parameters but no plastic strain at all. The unit […] -
-
Hypoplastic model for thermal cycles in clay (Abaqus)
Sherif Gomaa||Finite Elements|2 |Views 5,379
Dear all, I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented. I have done some runs for an axisymmetrical model for a single energy […] -
Problem with Hypoplastic Vumat use with CEL in Abaqus
Abdulkader ELHAJ||Finite Elements|0 |Views 3,379
Hello all, I am currently working on the FE modeling of anchors installation into the soil using the CEL analysis in Abaqus. I tried to use the hypoplastic vumat for […] -
sigini ans sdvini subroutine example for soil model in Abaqus
Safia EDAOUDI||Finite Elements|0 |Views 1,060
Dear all, I’m looking for a sigini and sdvini subroutine examples to calculate soil initial state with rest coeficient K0 method or ICP-05 method or any method available. thank you. […]
0 Comments
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver