Hello.. I am new in FLAC3D, could some send to me an example of data file code for pile soil interaction with seismic loads ? I will be thankful
Example of FLAC3D data file
Related Articles
-
Problem in calculating Lateral displacement of the pile using Hypoplastic clay model
arsalan Ahmad||Finite Elements|4 |Views 3,336
Hy Professor David, I am trying to verify the result of one of your paper by the title ‘Cyclic lateral response and failure mechanisms of semi-rigid pile in soft clay: […] -
set cavitation limit in ABAQUS/STANDARD when using SANISAND umat
Zhentao Liu||Finite Elements|6 |Views 3,064
Dear all I am recently working on the mechanical characteristics of large diameter monopiles under horizontal loads.The numerical simulation part of this project was carried out in ABAQUS/STANDARD and for […] -
A problem of convergence from using Hypoplastic model in Abaqus
Joe Chu||Finite Elements|5 |Views 3,671
Dear all, The sand hypoplastic model has been used to simulate the interaction between soil and pile. However, there is a bad convergence in the process of calculation. When I […] -
Consolidation analysis using HP clay model in Plaxis
muhammad shakeel||Finite Elements|1 |Views 3,979
Dear Prof David / SOil model community, I am performing coupled consolidation analysis for deep excavation in clay using HP clay model in Plaxis 3D. Performing the undrained analysis, the […] -
a question on the clay hypoplasticity model with Abaqus umat
Tao Zhu||Finite Elements|7 |Views 3,688
Dear all, I am a PhD student in Hohai University. Recently I have been trying to simulate a triaxial compression test using the hypoplasticity model for clay. The UMAT subroutine […] -
SANISAND dll
Emilio Bilotta||Finite Elements|2 |Views 3,631
Hi there, I’ve used successfully used SANISAND .dll with Plaxis 2016, but after switching to 2017 and now 2018 the .dll seems not to work (the parameter fields appear without […] -
Special issue of Computers and Structures “Numerical simulation of multi‐physics phenomena in geotechnical structures”
David Mašín||Finite Elements|1 |Views 5,678
https://www.sciencedirect.com/journal/computers-and-structures/about/forthcoming-special-issues Numerical simulation of multi‐physics phenomena in geotechnical structures Complete and thorough analysis of geotechnical structures, requires various complex materials models with internal structures, which cannot be described by the […] -
ABAQUS modeling: Warning about unconnected regions when using hypoplasticity subroutine
Jasmine Lokesh||Finite Elements|0 |Views 4,730
I ran a simple 3D model with symmetry boundary conditions first using elastic material and then as hypoplastic using a subroutine. However, in the former case, I don’t get the […]
0 Comments
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Ramon Varghese on Hypoplastic Interface Model: Does anybody implemented this model in FLAC3D
- Jh Xue on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver