Hello.. I am new in FLAC3D, could some send to me an example of data file code for pile soil interaction with seismic loads ? I will be thankful
||Finite Elements|1 |
||Finite Elements|1 |
Related Articles
-
Hypoplastic model for thermal cycles in clay (Abaqus)
Dear all, I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented. I have done some runs for an axisymmetrical model for a single energy […] -
Problem in “Hoek Brown Softening” Model
Dear, I have defined a model for the bedrock layer using the User Defined option “Hoek Brown Softening”. For the bedrock layer I have some laboratory data set as I […] -
Small displacements when using HP model in Plaxis 3D
I am modelling sand slopes in Plaxis 3D using an HP model. I am using soil parameters from “Modelling of Soil Behaviour with Hypoplasticity” by David Masin (2019). During the […] -
Boundary Conditions of Masin 2005 Paper for clay hypoplasticity
Hello, I am using clay hypoplastic umat code and trying to verify the code with the simulation on the paper of Prof. Masin. I found in the paper (Masin, 2005, […] -
UMAT and oneAPI compiler issues. (SOLVED…i hope :p)
Dear all, A while ago, a person asked about the hypoplasticity umats, the problem was that the umats were not working when compiled using the oneAPI fortran compiler, an error […] -
ABAQUS modeling: Warning about unconnected regions when using hypoplasticity subroutine
I ran a simple 3D model with symmetry boundary conditions first using elastic material and then as hypoplastic using a subroutine. However, in the former case, I don’t get the […] -
ABAQUS UMAT of hypoplastic clay model
Hi Everyone. I am new to this Platform. I want to use the hypoplastic model in my research. how I can download it UMAT file for ABAQUS software? -
Consideration of Ko using HP clay model
Dear SoilModels community Dear Prof. Masin / all I want to know how HP model considers Ko variation for the following cases: Ko with variation with OCR? Ko determination related […]
Supporting Organisations
Recent posts
-
Animating Soil Mechanics 3.7.2026
-
GeoXPM 19.6.2026
-
Autumn School in Soil Modelling at NTNU 16.6.2026
-
Viscohypoplastic bentonite (VIBE) model 28.5.2026
-
Problem in “Hoek Brown Softening” Model 30.4.2026
-
XFEM Hydraulic Fracturing in Abaqus – Pore Pressure Not Updating & Extremely Small Time Steps 28.4.2026
-
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
-
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
-
Problem with GeoStudio (Seepage) software 16.2.2026
-
Prague Geotechnical Days 2026 3.2.2026
-
Postdoctoral position at COFS, UWA 28.7.2025
-
Hypoplasticity clay in ABAQUS 23.7.2025
Hello Sir,
Could you please send me the dll file of FLAC3D? Zhengwy_0163@163.com, I will be thankful