- Version
- Download 379
- File Size 1.74 MB
- Create Date 30.6.2020
- Please login to download
Kadlíček, T. and Mašín, D. (2020). The strength reduction method in clay hypoplasticity. Computers and Geotechnics (in print)
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
- Challenges in simulating geomechanical models using Mohr-Coulomb with Tension Cut-Off in Abaqus 20.10.2023
- Analys soil liquefaction with Abaqus under blast load 19.10.2023
- Hardening soil Model UMAT 13.9.2023
- Problem with VUMAT interface 20.8.2023
- UMAT and oneAPI compiler issues. (SOLVED…i hope :p) 5.8.2023
Recent Comments
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
- Ignacio Zuloaga on MSE walls design in Plaxis
- Giada Orlando on Problem with VUMAT interface
- Michael Spyridis on Problem with VUMAT interface
- Ahmad Moeineddin on Problem with VUMAT interface
- Nikolay Suyo Calla on Hardening soil Model UMAT
- Johan Clausen on Challenges in simulating geomechanical models using Mohr-Coulomb with Tension Cut-Off in Abaqus
Dear Masin, which file is related to Umat for Abaqus?
https://soilmodels.com/download/clay-hypoplasticity-with-strength-reduction-umat-and-plaxis-dll/
Dear Masin,
Unfortunately, I couldn’t run a simple model just for geostatic step with hypoplastic models (for sand and clay soils). Would you have a simple file which has run in abaqus? Like ISA model which has two inp files with umat because some variations is needed in inp files that is difficult for beginners.
Cheerful,