Dear PhD,
I am studying roller vibrations on sandy soil models with vumat. Can PhD give me the subroutine model and input parameters of objects for reference?
Unit of the subprogram used?
Many thanks.
Hoang An
VUMAT ABAQUS: sandy soil
Related Articles
-
Undrained Tests with Basic Clay Hypoplasticity
Hashmi Sohawon||Constitutive Modelling|6 |Views 4,374
Hi Prof. David, I have obtained these results in that attached picture using Triax and got confused when seeing that an isotopically normally consolidated sample does not follow a trend […] -
Hypoplastic Model inquire
Mahmoud Hamed||Constitutive Modelling|3 |Views 4,168
Dear Prof. David Mašín Greetings I would like to discuss with you an issue. I have a problem in my simulation on ABAQUS. The problem in the simulation results is […] -
Degradation ( disturbance ) of hypoplastic clay
jh xue||Constitutive Modelling|0 |Views 64
Hello everyone, I want to use ABAQUS to do the degradation of hypoplastic clay, but you can ‘t do it with umat. Changing K, A, sf in ABAQUS has no […] -
Dynamic Compaction Simulation by ABAQUS
shenouda Mekhail||Constitutive Modelling|0 |Views 4,531
Greeting Everyone, I’m a new user of ABAQUS. I’m trying to simulate soil dynamic compaction by Cap model. I simulated the blow by half sinusoidal wave. Although I used Cap […] -
consistent tangent stiffness calculation in hypoplasticity sand UMAT
Ran Tu||Constitutive Modelling|1 |Views 4,611
Dear all, Thanks for hypoplasticity sand UMAT provided by Prof. Masin. During studying hypo sand UMAT, I am encountered with a question about consistent tangent stiffness calculation. subroutine ”perturbate_h“ seems […] -
Looking for help
Axel Grauwinkel||Constitutive Modelling|4 |Views 353
Hello guys. I just tried to calibrate on soilmodels. I´ve done three CIUP-REC-test plus one oedometric test. As you can see in the images, that there is still something quite […] -
Sanisand model
sahar saab||Constitutive Modelling|1 |Views 4,267
Is the Sanisand constitutive model 3 dimensional? Could it be used for dry sand cases using C4D8 elements? (drained sand) Is it possible to apply it in a dynamic implicit […] -
Initial Stiffness of CU test in Masin’s 2014 Model
Shen Wang||Constitutive Modelling|1 |Views 4,099
Hi, I am using Hypoplasticity model with explicit asymptotic boundary surface proposed by Prof. Masin in 2014. In this model, parameter ‘nu’ controls initial stiffness in CU test. But when […]
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Jh Xue on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
Dear Hoang, I am not sure whether I understood correctly your question. In any case, vumat implementation for hypoplastic model is here: https://soilmodels.com/download/vumat_umatinterface-zip/. Please study the related references to find example parameter sets. Regards David
Dear David Mašín,
I am a new user of abaqus. Good, Dr. can give me an example of a complete soil model using vumat for hypoplastic model.
Thank you very much, Dr. for example .inp and .for files.
mail: sg-thaihoangan@e-university.edu.vn
Best regards
Hoang An,