On the simulation of the cyclic mobility effect with an ISA -hypoplastic hypoplastic hypoplastic model, is it possible to simulate 3D liquefiable sandy soil by available u-mat file which is facilitated by D.R Fuentes?
finite element modeling of ISA-HP for sand material
Related Articles
-
Hypoplastic model for thermal cycles in clay (Abaqus)
Sherif Gomaa||Finite Elements|2 |Views 5,379
Dear all, I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented. I have done some runs for an axisymmetrical model for a single energy […] -
Hypoplastic model for clays in a Plaxis 2D simulation – Problem
Daniel Valencia||Finite Elements|2 |Views 3,274
Hello everybody, Using Hypoplastic model for clays, with intergranular concept parameters, I am simulating a simple oedometer test, phase by phase, using a dummy layer on the top of the […] -
a question on the clay hypoplasticity model with Abaqus umat
Tao Zhu||Finite Elements|7 |Views 3,687
Dear all, I am a PhD student in Hohai University. Recently I have been trying to simulate a triaxial compression test using the hypoplasticity model for clay. The UMAT subroutine […] -
Barodesy download package including small strain stiffness and strength reduction (UMAT and PLAXIS dll)
Manuel Bode||Finite Elements|0 |Views 3,357
A new download package for Clay Barodesy is available in the download section (https://soilmodels.com/barodesy/) The model uses the basic model of barodesy for clay (Medicus G. and Fellin W. 2017) […] -
Presentations on hypoplasticity applications, D. Mašín, NGI 2017
David Mašín||Finite Elements|0 |Views 5,026
Based on some requests, I share here two presentations on hypoplasticity applications. One is related to simulation of various boundary value problems, the other focuses on simulation of cyclic and […] -
hypoplasticity model with Abaqus umat on Brno clay
mahdie masoudi||Finite Elements|5 |Views 4,109
Dear all, I am a Ph.D. student at Kharazmi University. Recently I have been trying to simulate a triaxial compression test using the hypoplasticity model for clay using ABAQUS. The […] -
Problem in GRPS embankment simulation In ABAQUS
Bidur Pathak||Finite Elements|0 |Views 3,277
Hi, I am doing Plane strain 2D simulation of GRPS embankment in ABAQUS, i encountered a problem that results of with geogrid and without geogrid both are showing same deflection. […] -
A problem of convergence from using Hypoplastic model in Abaqus
Joe Chu||Finite Elements|5 |Views 3,666
Dear all, The sand hypoplastic model has been used to simulate the interaction between soil and pile. However, there is a bad convergence in the process of calculation. When I […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
Yes