Hi everyone:
I am trying to use SANISAND as the constitutive model of soil, and use ABAQUS software to simulate pile-soil interaction. First step is “Geostatic”, the second step is “Static, General”. The first picture is the model parameters of SANSAND, and the second picture is the contour map of state variable 29 (sdv29).
As you can see, the red part in the second figure indicates that the excess pore water pressure U of the soil is negative, because UMAT sets the state variable 29 – excess pore water pressure U equal to the volume strain of the soil element multiplied by the volume modulus of water, that is, the volumetric strain of the soil element is positive(dilatancy). Is this normal? I have changed the initial void ratio of the soil several times, but the value of state variable 29 of the soil element near the pile is not negative. Can anyone explain this situation?
SANISAND pile-soil-interaction ABAQUS
Related Articles
-
Regarding FRIC : As a beginner
Arun C||Constitutive Modelling|1 |Views 4,202
Sir, As a beginner of FRIC I am facing some difficulties to implement it. The downloaded FRIC code has been added to my pile soil friction model and trying to […] -
ALERT Geomaterials – SoilModels support declaration
David Mašín||Constitutive Modelling|0 |Views 4,200
ALERT Geomaterials (The Alliance of Laboratories in Europe for Education, Research and Technology) is a European organisation including 33 Universities or Organisations, which are most active in the field of numerical […] -
Sanisand umat with BV problem
Luis Aviles||Constitutive Modelling|0 |Views 3,864
Hi, Does someone know if sanisand implementation has been used in a boundary value problem for slope? do you have any references? Thanks very much! -
Question about Interface between UMAT and VUMAT
Sina Niazi||Constitutive Modelling|1 |Views 4,345
Hello, I read the research report and the FORTRAN code available at https://soilmodels.com/download/vumat_umatinterface-zip/. It sounds quite interesting but I have a couple of questions about the FORTRAN code: 1- Did […] -
Question on the Matlab driver-hypoplastic models
c sx||Constitutive Modelling|5 |Views 3,968
Dear all, After carefully reading the matlab drivers of hypoplastic models, I was wondering why there is not mix control undrained TX compression. I want to achieve the same result […] -
How can I solve the error in Abaqus mentioned below?
Sudipta Bhowmick||Constitutive Modelling|19 |Views 6,256
I am using SANISAND to simulate a triaxial compression test under monotonic loading. But every time my simulations break and give the same message “Abaqus/Implicit Packager exited with an error […] -
Shear modulus degragation
Baban Bapir||Constitutive Modelling|1 |Views 4,629
Hello all, I am using the clay hypoplsticity model in Abaqus. As shown in the picture, I have to construct the stiffness desegregation curve to calibrate the R value. Can […] -
General questions on implementation of sand hypoplasticity model with Abaqus umat
Panpan Guo||Constitutive Modelling|5 |Views 4,631
Dear all, I am a PhD student in Zhejiang University. Recently, I have been working on the simulation of a braced excavation with Abaqus. I want to simulate the soil […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
How set your parameters?