Hi Prof. Masin ,
It is related to my previous post.
Sorry to bother you again. I simulated Oedometer test in Plaxis as well as centrifuge reloading (using HP clay model). Both simulations show that during reloading K0 is less than K0nc.
This paper presented K0 in centrifuge “Effect of Overconsolidation on K0 in Centrifuge Models Using CPT and Tactile Pressure Sensor:. It show that reloading K0 is always larger than K0nv while much less than unloading K0. Also Schmidt proposed equation (shown in attached photo) show that K0 for reloading always higher than K0nc. On the other hand, HP model show K0 for reloading is less than K0nc (oedometer and centrifuge reloading). Please have a look on the attached results and give your feedback. Is it possible K0for reloading becomes less than K0nc? May I know which equation is being used in HP model for K0 prediction?
K0 determination Reloading using HP clay model
Related Articles
-
Oedometer test simulation with “Sand Hypoplasticity Model” in Plaxis
Manuel Winkler||Constitutive Modelling|2 |Views 4,408
Hi, I just came across some problems with the implementation of the “Sand Hypoplasticity Model” in Plaxis. I wanted to to perform a simulation of an oedometer test on a […] -
Degradation ( disturbance ) of hypoplastic clay
jh xue||Constitutive Modelling|0 |Views 27
Hello everyone, I want to use ABAQUS to do the degradation of hypoplastic clay, but you can ‘t do it with umat. Changing K, A, sf in ABAQUS has no […] -
SANICLAY-B (2018) how to calculate Dep
Steve Xu||Constitutive Modelling|0 |Views 4,205
Dear fellows, I have been working on coding SANICLAY-B model (2018) . Now I have one question in terms of this model. But I am stuck now. I have two […] -
How can I solve the error in Abaqus mentioned below?
Sudipta Bhowmick||Constitutive Modelling|19 |Views 6,245
I am using SANISAND to simulate a triaxial compression test under monotonic loading. But every time my simulations break and give the same message “Abaqus/Implicit Packager exited with an error […] -
Problem with SANISAND UMAT
Safia EDAOUDI||Constitutive Modelling|3 |Views 9,253
Hello all, I’m using the SANISAND UMAT I downloaded here for my research, the problem I found is it gives me wrong results in ABAQUS and INCREMENTAL DRIVER for element […] -
Calibration the UMAT sand hypoplastic parameters
aysar hassan||Constitutive Modelling|3 |Views 4,032
Dear all, I’m facing trouble in calculating NO. 16 parameter in the UMAT for sand hypoplasticity by Dr. Masin, any help will be really appreciated especially with an example. Best […] -
-
Difference between ExCalibre and Plaxis for Oedometer test
Marco Hofer||Constitutive Modelling|3 |Views 4,211
Hello all, i did the automatic calibration for the Dobrany and Motol sand and tried to model the soil tests also in Plaxis and then to compare both. For the […]
0 Comments
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
- Ignacio Zuloaga on MSE walls design in Plaxis
- Giada Orlando on Problem with VUMAT interface