Hello Everyone,
I am using the UMAT code for clay hypoplasticity provided by Prof. Masin — https://soilmodels.com/download/plaxis-umat-hypoplas-zip/
I made a test model in Abaqus2020 and applied the umat code (umat_hcea.for). But there was no calculation results, as shown in Fig.1, and the error message was shown in Fig.2. Meanwhile, I found the error message “libirc.lib(fast_mem_ops.obj) : warning LNK4210: .CRT section exists; there may be unhandled static initializers or terminators” in “XX.log” file.
I tried other umat codes, and they are worked well.
So, how can I fix it? Has anyone else encountered this situation?
Thank you very much!
“Warning LNK4210” – hypoplastic clay UMAT
Related Articles
-
Degradation ( disturbance ) of hypoplastic clay
jh xue||Constitutive Modelling|0 |Views 72
Hello everyone, I want to use ABAQUS to do the degradation of hypoplastic clay, but you can ‘t do it with umat. Changing K, A, sf in ABAQUS has no […] -
ExCalibre – Definiton of q
Manuel Winkler||Constitutive Modelling|3 |Views 4,167
Hello, I am performing calibration trials for the hypoplastic sand model with the aid of ExCalibre and i was wondering how the deviatoric stresses q for the triaxial test input […] -
SaniSand Model in Plaxis 3D
Kassem Dib||Constitutive Modelling|1 |Views 17,040
Hello.. I am using SaniSand constitutive model, for the simulation of the behavior of onshore wind turbine using plaxis 3d. The dll file published in the website request the determination […] -
What is an appropriate damping model for dynamic liquefaction analysis of tailings storage facility in FLAC?
Paul le Roux||Constitutive Modelling|0 |Views 7,465
Has anyone had success simulating earthquake loading / dynamic liquefaction in a full-scale, plane-strain model of a TSF in FLAC2D/FLAC3D? The topic of damping is complex and the choice of […] -
Regarding FRIC : As a beginner
Arun C||Constitutive Modelling|1 |Views 4,221
Sir, As a beginner of FRIC I am facing some difficulties to implement it. The downloaded FRIC code has been added to my pile soil friction model and trying to […] -
ExCalibre Automatic Calibration
Marco Hofer||Constitutive Modelling|5 |Views 4,190
Hello all, i have another question regarding the calibration process. Why do the initial void ratios differ between the input file and the output from excalibre? What is done during […] -
K0 determination Reloading using HP clay model
muhammad shakeel||Constitutive Modelling|0 |Views 3,938
Hi Prof. Masin , It is related to my previous post. Sorry to bother you again. I simulated Oedometer test in Plaxis as well as centrifuge reloading (using HP clay […] -
Hypoplastic UMAT & Void Ratio
Hashmi Sohawon||Constitutive Modelling|0 |Views 5,647
Hi all, Can anyone give a clarification on the material property (parameter 22) in the hypopplasticity umat for clay on Abaqus. My understanding is that these parameters are defined as […]
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Ramon Varghese on Hypoplastic Interface Model: Does anybody implemented this model in FLAC3D
- Jh Xue on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
Did you manage to sort this out?