Hello..
I am testing SaniSand constitutive model as published by Mr. Masin at this site. The Abaqus is V21 and the visual studio 2017 with OneAPI compiler, the Abaqus verification gives pass for all subroutines, however the following error occurs :
“Abaqus/Standard analysis exited with an error-please see the massages file…” .
The model works correctly using abaqus 2017 with vs2013 and intelXE2017.
I am very confused about this problem.
Abaqus OneAPI Compiler
Related Articles
-
Consolidation analysis using HP clay model in Plaxis
muhammad shakeel||Finite Elements|1 |Views 3,978
Dear Prof David / SOil model community, I am performing coupled consolidation analysis for deep excavation in clay using HP clay model in Plaxis 3D. Performing the undrained analysis, the […] -
Using pore fluid-stress element in SandSand
Kassem Dib||Finite Elements|1 |Views 3,474
Hello everyone, Is it possible to use pore fluid- stress element in abaqus standard when soil is modeled using SANISAND constitutive model ? (UMAT) -
Some confusion about the parameters in Abaqus umat of Hypoplastic Modeling
Joe Chu||Finite Elements|1 |Views 3,363
Dear all, When I check the umat file of sand hypoplastic modeling, I find there are two parametesr(p_t(2), bulk_w(15)) without any definitions. Could someone kindly explain the exact meaning for […] -
Problem in simulating CPT using SANISAND04
an zhanng||Finite Elements|6 |Views 1,455
I have a question regarding the simulation of cone penetration tests using the SANISAND04 model. I have observed that the parameter m (yield surface size)has a significant impact on the […] -
Slope stability calculation with hypoplasticity using phi-c reduction available now in download section
David Mašín||Finite Elements|0 |Views 3,730
The strength reduction method in clay hypoplasticity now available -
EasyTochnog input file generator
Dennis Roddeman||Finite Elements|0 |Views 3,359
Hi All, Tochnog Professional now has an EasyTochnog extension, see http://www.tochnogprofessional.nl/easy_tochnog/page.php. With simple input data like pile diameter, pile length, slope geometry, sheet pile data, etc. a complete Tochnog Professional […] -
SANISAND dll
Emilio Bilotta||Finite Elements|2 |Views 3,626
Hi there, I’ve used successfully used SANISAND .dll with Plaxis 2016, but after switching to 2017 and now 2018 the .dll seems not to work (the parameter fields appear without […] -
Tochnog Professional overview movie in youtube
Dennis Roddeman||Finite Elements|0 |Views 3,275
Dear All, We posted a small overview movie of Tochnog Professional in YouTube. For more movies see the complete channel.
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
There is a known issue with the oneAPI compiler, not all umat works when using oneAPI, I thought they would have fixed it by now but apparently, it’s not the case. This is an unfortunate situation because it will push researchers to buy previous intel compiler versions instead of using the already free oneAPI compiler