Hello.. I am defining the hypoplastic parameters for Karlsruhe sand (found in a paper) using MIDAS GTS NX. In the software the a requesting (in addition of parameters) the number of internal state variables, and the number of integer indicator variables.
I know how to define 22 parameters, my issu is how to define the number of internal state variables and the number of integer indicator variables
Htypoplastic Model in Miidas GTS NX
Related Articles
-
Hardening Soil Model in Abaqus
Abulimiti Ayizula||Constitutive Modelling|5 |Views 5,332
Is there Hardening Soil Model in Abaqus? -
Hypoplastic model for Granular soil
Naveen Meena||Constitutive Modelling|5 |Views 4,972
Hello everyone, Could you please anyone tell me that how I can define the hypoplastic constitutive model for granular soil in ABAQUS 6.13. With Regards, Naveen. -
Sanisand
Norma Harb||Constitutive Modelling|1 |Views 3,419
Hello, I am simulating soil and pile using Sanisand on Abaqus. I have problems with the analysis because of the value of the parameter 18. When I use small values, […] -
MSE walls design in Plaxis
Leo Alibert||Constitutive Modelling|2 |Views 653
Hi everyone, this is my first post in this forum. I am collecting initial data on the most appropriate soil model for the analysis of a multitiered MSE wall. I […] -
Setting of Kw for Hypoplastic Clay UDSM in Plaxis
Joel Tan||Constitutive Modelling|2 |Views 4,256
Prof. David Masin, I am posting the queries I have emailed you earlier which you have answered and therefore I am posting it here as per your request. I wish […] -
SANICLAY-B (2018) how to calculate Dep
Steve Xu||Constitutive Modelling|0 |Views 4,208
Dear fellows, I have been working on coding SANICLAY-B model (2018) . Now I have one question in terms of this model. But I am stuck now. I have two […] -
-
sand liquefaction modelling in Anura3D
Daniel Brox||Constitutive Modelling|0 |Views 512
Beginner level question for this forum – Trying to replace a Mohr-Coulomb model of sand in an Anura3D simulation with a material model which accurately describes sand liquefaction. References I’ve […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
I do not know Midas but according next link the umats from soilmodels are not compatible
http://manual.midasuser.com/en_common/GTS%20NX/150/GTS_NX/Appendix/USSR.htm
Thank you Arie..
I saw an old comment for you about definition of pore pressure as temperature.. may to know how to define the analogy between hydraulic and thermal conductivity ? What to define for specific heat..
QT=(T1-T2)*A*ktemp/L*dt [J]
ΔT=Q/VRCtemp
Qw= ΔhxAxkw/L*dt = (P1-P2)/9810xAxkw/L*dt [m3]
kw=m/s
ΔP=Qw/VxEwbulk
=> ktemp=conductility=Kw/9810
=> Ctemp=specified heat= 1/Ewbulk/R
Thank you Arie..
I really appreciate your help..
Thank you very very much again..
Dear Arie..
do you detailed document about this analogy?
could you please explain more about units and the definition of each term you mentioned because i am confused little bit
Thanks a lot
sorry.. do you have **