Professorship at Ruhr-University Bochum
Related Articles
-
Two PhD Positions in Numerical Modelling in Geomechanics at Charles University
David Mašín||Closed Calls|0 |Views 1,644
Two new PhD positions in numerical modelling in geomechanics are open at Charles University. Starting date October 2018, supervisor D. Mašín, topics: “Hypoplastic model for unsaturated expansive clays used in […] -
PhD position in slope stability modeling at University of Innsbruck
Wolfgang Fellin||Closed Calls|0 |Views 1,066
A PhD position in modeling of submerged slopes is available at the Division of Geotechnical and Tunnel Engineering at the University of Innsbruck. Further information can be found at: https://www.uibk.ac.at/geotechnik/nathaz_phd_position.html […] -
PhD position at Charles University in Prague: Modelling of THM Bentonite Behaviour for Nuclear Waste Repositories
David Mašín||Closed Calls|0 |Views 1,017
PhD position is open at Charles University in Prague on Modelling of THM Bentonite Behaviour for Nuclear Waste Repositories. Annotation is attached. Deadline for application: 30. November 2018. Project start: […] -
Three PhD opportunities at UWA, Australia
Britta Bienen||Closed Calls|0 |Views 906
Open call for three PhD scholarships “Opportunities in wave energy”. This exciting project is part of the newly established Wave Energy Research Centre in Albany, Western Australia. -
ComGeo IV Conference – Abstract deadline extension
Claudio Tamagnini||Closed Calls|0 |Views 669
4th International Symposium on Computational Geomechanics (ComGeo IV) Assisi, Italy, May 2-4, 2018 The last date for electronic submission of one-page abstracts for the forthcoming ComGeo IV has been extended […] -
International Symposium on Computational Geomechanics (ComGeo IV), Assisi (Italy), May 2-4th, 2018.
Pande G.N.||Closed Calls|0 |Views 771
Dear Colleague: We are pleased to announce that the fourth International Symposium on Computational Geomechanics (ComGeo IV) will be held in Assisi (Italy), May 2-4th, 2018. The format of this […] -
PhD position is open at Charles University in Prague on Modelling of THM Bentonite Behaviour for Nuclear Waste Repositories.
David Mašín||Closed Calls|0 |Views 1,195
PhD position is open at Charles University in Prague on Modelling of THM Bentonite Behaviour for Nuclear Waste Repositories. For more information, see https://www.stars-natur.cz/phd-positions/geology/hypoplastic-model-for-unsaturated-expansive-clays-used-in-simulations-of-bentonite-homogenization-for-nuclear-waste-repositories?back=7nlrl Deadline for application: March 19, 2019. […] -
PhD position at Charles University in Prague: Modelling of Slope Stability using Hypoplastic Model
David Mašín||Closed Calls|0 |Views 1,052
PhD position is open at Charles University in Prague on modelling of slope stability using hypoplastic model. Annotation is attached. Deadline for application: 30. November 2018. Project start: 1. 1. […]
0 Comments
Search SoilModels Website
Recent posts
-
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
-
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
-
Problem with GeoStudio (Seepage) software 16.2.2026
-
Prague Geotechnical Days 2026 3.2.2026
-
Postdoctoral position at COFS, UWA 28.7.2025
-
Hypoplasticity clay in ABAQUS 23.7.2025
-
Drucker-Prager Cap 29.5.2025
-
Abaqus RITSS with hypoplastic 9.4.2025
-
Fellin UMAT subroutine 2.4.2025
-
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
-
Abaqus RITSS methon for LDFE analysis with hypoplastic 17.3.2025
-
Request for VUMAT Implementation of Mohr-Coulomb, Drucker-Prager, or Drucker-Prager Cap 28.2.2025
Recent Comments
- Ding Yan on Download package of a complete dataset “Karlsruhe Kaolin – Cyclic tests (T. Wichtmann)”
- Arie Koot on mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface
- Arie Koot on Multilaminate Model (Schädlich & Schweiger)
- Amir F on Problem with GeoStudio (Seepage) software
- Nabanita Saha on set cavitation limit in ABAQUS/STANDARD when using SANISAND umat
- Nabanita Saha on SANISAND Abaqus UMAT and Plaxis implementations
- Tian Fapai on SANISAND Abaqus UMAT and Plaxis implementations
- Heng Wang on Multilaminate Model (Schädlich & Schweiger)
- Zhang Hongwei on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Ruimin Chen on Problem with VUMAT interface
- Nitesh Bhume on UMAT and oneAPI compiler issues. (SOLVED…i hope :p)
- Aleksandar Kostadinovic on Karlsruhe fine sand – Cyclic tests (T. Wichtmann)
- Amrane Moussa on Kadlíček, T., Ochmański, M., Mašín, D. and Duque, J. (2022) Report on Charles University implementation of high cycle accumulation model
- Ramon Varghese on SANISAND for FLAC3D Download
- Shuhan Cao on Hardening Soil or Hardening Soil-Small umat in Abaqus
- Kuikui Guigui on Hypoplastic Interface Model (Stutz et al., 2016)
- Kuikui Guigui on Download Package for Hypoplastic interface model and UMAT – FRIC interface
- Francisco José Mendez on Programme of the ALERT Olek Zienkiewicz school on Constitutive Modelling of Geomaterials, February 3 to 7, 2025, Prague, Czech Republic








