I am looking for an example of the oedometric test similation with Abaqus, in particular : Load-Unload-Reload
Tags: oedometer
||Laboratory testing|2 |
||Laboratory testing|2 |
Related Articles
-
Oedometer tests on Ticino sand
Dear all, I tried to find some oedometer tests result on Ticino sand in different relative densities. However, I couldn’t find any database related to this type of experiment. I […] -
-
Issues on reading xlsx extension for calibration input data
Dear all, I am trying to calibrate the hypoplastic parameters for the hypo sand model with ExCalibre tool, using CID for a particular sand. The moment I try to load […] -
Guidance for a newbie
Greetings I am entirely new to soil modelling. I want to undertake a thesis on soil modelling. Currently I’ve basic understanding of soil mechanics which is taught at undergraduate level. […]
Supporting Organisations
Recent posts
-
Connecting remote sensors to the Plaxis FEM 3D using python 26.7.2024
-
Intergranular Strain Extensions 16.7.2024
-
Abaqus Hypoplasticity Primary Variable Is Not Available 1.7.2024
-
Vumat to calculate excess pore in Coupled Eulerian-Lagrangian ABAQUS 1.7.2024
-
Drucker Prager Cap Hardening Model 20.6.2024
-
Soil model for sand under drained cyclic loading 15.6.2024
-
In Abaqus how do we use *DLOAD for defining both user-defined pressure and body force simultaneously? 15.6.2024
-
Issue in applying SANISAND04 UMAT to Boundary-Value-Problem 31.5.2024
-
Triaxial compression test using Mohr-Coulomb model in Abaqus 27.5.2024
-
The Mises stress calculated by the hypoplasticity model considering the intergranular strain is all 0 20.5.2024
-
Degradation ( disturbance ) of hypoplastic clay 23.4.2024
-
Degradation ( disturbance ) of hypoplastic clay 23.4.2024
Request your project from this channel:
http://www.youtube.com/CivilSkill
Hello, can you share the simulation if have found it ?