Hi All,
Starting from Saturday January 26 2019 the Tochnog Professional page moves to http://www.tochnogprofessional.nl
Best, Dennis Roddeman
||Finite Elements|1 |
||Finite Elements|1 |
Related Articles
-
fortran format
hi, every one i have problem with fortran format my abaqus is 6.14 and this version accept (.for) format for fortran but some subroutines are in (.f ) format is […] -
Hypoplastic model for clays in a Plaxis 2D simulation – Problem
Hello everybody, Using Hypoplastic model for clays, with intergranular concept parameters, I am simulating a simple oedometer test, phase by phase, using a dummy layer on the top of the […] -
Tochnog Professional 100 element free version, www.tochnogprofessional.nl
The Tochnog Professional finite element program is now available as free version with 100 elements. It can be downloaded without registration from http://www.tochnogprofessional.nl. Several commercial and free pre- and postprocessors […] -
Special issue of Computers and Structures “Numerical simulation of multi‐physics phenomena in geotechnical structures”
https://www.sciencedirect.com/journal/computers-and-structures/about/forthcoming-special-issues Numerical simulation of multi‐physics phenomena in geotechnical structures Complete and thorough analysis of geotechnical structures, requires various complex materials models with internal structures, which cannot be described by the […] -
Abaqus OneAPI Compiler
Hello.. I am testing SaniSand constitutive model as published by Mr. Masin at this site. The Abaqus is V21 and the visual studio 2017 with OneAPI compiler, the Abaqus verification […] -
Plaxis 3D Tunnel
Hi Everybody, I would like to ask an error problem where I am getting while using Plaxis 3D tunnel V 1.2. Previously I was using the software with Windows 7 […] -
How to model the settlement in soil due to water drawdown.
Which software has the feature to model soil settlement due water drawdown? -
A problem of convergence from using Hypoplastic model in Abaqus
Dear all, The sand hypoplastic model has been used to simulate the interaction between soil and pile. However, there is a bad convergence in the process of calculation. When I […]
Supporting Organisations
Recent posts
-
Hardening Soil or Hardening Soil-Small umat in Abaqus 2.1.2025
-
hypoplastic interface 11.12.2024
-
Triaxial Test Driver SANISAND 30.10.2024
-
REQUEST FOR EXPRESSIONS OF INTEREST (REOI) FOR PROJECT IN CONSTITUTIVE MODELLING 23.10.2024
-
Programme of the ALERT Olek Zienkiewicz school on Constitutive Modelling of Geomaterials, February 3 to 7, 2025, Prague, Czech Republic 11.10.2024
-
Connecting remote sensors to the Plaxis FEM 3D using python 26.7.2024
-
Intergranular Strain Extensions 16.7.2024
-
Abaqus Hypoplasticity Primary Variable Is Not Available 1.7.2024
-
Vumat to calculate excess pore in Coupled Eulerian-Lagrangian ABAQUS 1.7.2024
-
Drucker Prager Cap Hardening Model 20.6.2024
-
Soil model for sand under drained cyclic loading 15.6.2024
-
In Abaqus how do we use *DLOAD for defining both user-defined pressure and body force simultaneously? 15.6.2024
A amazing new appearance, congratulations!