Dear all,
I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented. I have done some runs for an axisymmetrical model for a single energy pile and it works very well. But when I tried to make 3D modeling for an energy-pile group using this UMAT file when I start the job, nothing happened and after 10 secs the Abaqus mentioned that job is completed but actually no results appear and no steps are solved.
Can anyone help me?
Thank you!
Hypoplastic model for thermal cycles in clay (Abaqus)
Related Articles
-
Factor of safety in Plaxis 3D using hypoplastic model for sand
Arno Crous||Finite Elements|1 |Views 3,823
I am currently modelling a test conducted in the geotechnical centrifuge facility at HKUST. The test consisted of a sand slope with a rising water table. The slope height in […] -
How to model the settlement in soil due to water drawdown.
Guru Panda||Finite Elements|5 |Views 4,009
Which software has the feature to model soil settlement due water drawdown? -
SANISAND dll
Emilio Bilotta||Finite Elements|2 |Views 3,625
Hi there, I’ve used successfully used SANISAND .dll with Plaxis 2016, but after switching to 2017 and now 2018 the .dll seems not to work (the parameter fields appear without […] -
Tochnog Professional overview movie in youtube
Dennis Roddeman||Finite Elements|0 |Views 3,275
Dear All, We posted a small overview movie of Tochnog Professional in YouTube. For more movies see the complete channel. -
Free Tochnog Professional list of capabilities and papers
Dennis Roddeman||Finite Elements|0 |Views 3,355
Dear All, you can find a list with some of Tochnog Professional capabilities and application papers at: http://www.tochnogprofessional.nl/Tochnog_Professional_wikipedia_format.pdf Stay safe, Dennis Roddeman -
Skin friction along depth of pile
Md Shafiqul Islam||Finite Elements|0 |Views 3,362
Dear all, I am simulating static pile load test in the rock by using ABAQUS. For comparison of numerical results with the experimental, I need skin friction vs depth plot. […] -
Hypoplasticity sand convergence issues
anis kheffache||Finite Elements|0 |Views 3,454
Hi everyone, i am modeling laterally loaded monopile using abaqus, My 3d model looks like this, only half of the model is simulated, symmetry boundary conditions is applied to the […] -
Geostatic method for Abaqus/Explicit
Joe Chu||Finite Elements|3 |Views 4,844
Dear all, I recently conducted a numerical simulation of pile-soil interaction. I digged a vertical hole and insert the pile into that with general contact. Due to many reasons, I […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
- Ignacio Zuloaga on MSE walls design in Plaxis
- Giada Orlando on Problem with VUMAT interface
Dear Sherif, this issue seems similar as issue reported by Chiara. It thus seems there is some problem in 3D implementation of the model. I am currently unable to help and umat author Qijie Ma is not responding. It will be necessary to go into umat and print debugging messages at various positions in the code, or run it through debugger, to find where the analysis stops. If any one has any news, please let us know. David
Hello
subscribe to and seek assistance from the
ABAQUS mailing list
https://groups.yahoo.com/neo/groups/Abaqus/info
Search the archive of the list before posting in it.
The list does not accept attachments.
Or
http://www.eng-tips.com/threadminder.cfm?pid=799
or from the ResearchGate discussion forum.
For advice on mechanics in general, including modeling,
you can consult
http://imechanica.org/
If you need subroutines: as an introduction get the file
http://imechanica.org/files/Writing User Subroutines with ABAQUS.pdf
Simulia Learning Community
3ds.com/slc
Good luck
Frank