Which software has the feature to model soil settlement due water drawdown?
How to model the settlement in soil due to water drawdown.
Related Articles
-
Special issue of Computers and Structures “Numerical simulation of multi‐physics phenomena in geotechnical structures”
David Mašín||Finite Elements|1 |Views 5,678
https://www.sciencedirect.com/journal/computers-and-structures/about/forthcoming-special-issues Numerical simulation of multi‐physics phenomena in geotechnical structures Complete and thorough analysis of geotechnical structures, requires various complex materials models with internal structures, which cannot be described by the […] -
UMAT and oneAPI compiler issues. (SOLVED…i hope :p)
anis kheffache||Finite Elements|7 |Views 1,697
Dear all, A while ago, a person asked about the hypoplasticity umats, the problem was that the umats were not working when compiled using the oneAPI fortran compiler, an error […] -
Boundary Conditions of Masin 2005 Paper for clay hypoplasticity
Shen Wang||Finite Elements|4 |Views 3,701
Hello, I am using clay hypoplastic umat code and trying to verify the code with the simulation on the paper of Prof. Masin. I found in the paper (Masin, 2005, […] -
Interface to study soil-structure interaction in Plaxis 3D (Clay Hypoplasticity)
Leon Cortes||Finite Elements|6 |Views 6,271
Hello, I am trying to simulate the behavior of helical anchors (also called screw anchors) using PLAXIS 3D and a clay hypoplasticity constitutive model. The helical anchor shaft is simulated […] -
DIANA with monopile follows Blum theory saving 10 m of length
Ab van den bos||Finite Elements|0 |Views 3,322
Where the client was forced to make all his horizontal loaded Dolphins (piles) 10 m longer we could trustworthy proof that this actually was not necessary saving millions of cost […] -
ABAQUS modeling: Warning about unconnected regions when using hypoplasticity subroutine
Jasmine Lokesh||Finite Elements|0 |Views 4,723
I ran a simple 3D model with symmetry boundary conditions first using elastic material and then as hypoplastic using a subroutine. However, in the former case, I don’t get the […] -
Problem with Hypoplastic Vumat use with CEL in Abaqus
Abdulkader ELHAJ||Finite Elements|0 |Views 3,379
Hello all, I am currently working on the FE modeling of anchors installation into the soil using the CEL analysis in Abaqus. I tried to use the hypoplastic vumat for […] -
Modeling of granular soil by using UMAT hypoplastic in Abaqus
Naif Alsanabani||Finite Elements|5 |Views 4,030
Dear all I am using the UMAT of hypoplastic model for simulation soil (3D modeling) under cyclic loading. The analysis was completed at geostatic step. But for consolidation step (soil, […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
Abaqus with user subroutine: for example use C3D8T element: With this Temperature element water flow can be modeled
Hi Arie,
I see several times you suggested using temperature instead of water flow, but I wonder how you did it. is it possible to describe a little about the procedure or provide an example file?
Regards
I only have it for Vumat:
Wateflow using temperature.
type of calc: dynamic temperature-displacement explicit
element type: C3D8RT
output: temp and NT11 (element + nodal)
QT=(T1-T2)*A*ktemp/L*dt [J]
ΔT=Q/VRCtemp
stable time < VRCtemp/∑A*ktemp/L
example:
mesh 0.1×0.1×0.1
λ=200
R=2800
C=880
stable time < 0.1×0.1×0.1x2800x880/(4*0.1×0.1×200)/0.1)=31sec
general: stable time temp much higher than mechanical stable time
Qw= ΔhxAxkw/L*dt = (P1-P2)/9810xAxkw/L*dt [m3]
kw=m/s
ΔP=Qw/VxEwbulk
stable time < V/Ewbulk/∑A*kw/9810/L
thus ktemp=conductility=Kw/9810
thus Ctemp=specified heat= 1/Ewbulk/R
in vumat: Enerpl(new)=Enerpl(old)+plasticenergy/R
for waterflow: Enerpl(new)=Enerpl(old)+(pwnew-pwold)/Ewbulk/R
COMSOL. This tutorial could be of great help :
https://www.comsol.fr/model/biot-poroelasticity-483
This can be done by most of the software here. For Plaxis, see this tutorial: https://www.plaxis.com/support/tutorials/plaxis-3d-tutorial-rapid-drawdown-analysis/