hi, every one
i have problem with fortran format
my abaqus is 6.14
and this version accept (.for) format for fortran
but some subroutines are in (.f ) format
is any way to change these versions with no changing in codes?
i want to change .f to .for
thank you
fortran format
Related Articles
-
Few more Question on calculating lateral displacement of pile using hypoplastic clay model
Muhammad Ahmad||Finite Elements|0 |Views 3,871
Dear Professor David, Thank you very much for your previous clarification. its really helps. In continuation to my previous , there are few more question, i want your kindself to […] -
Presentations on hypoplasticity applications, D. Mašín, NGI 2017
David Mašín||Finite Elements|0 |Views 5,022
Based on some requests, I share here two presentations on hypoplasticity applications. One is related to simulation of various boundary value problems, the other focuses on simulation of cyclic and […] -
UMAT for hypoplastic subroutine
Naif Alsanabani||Finite Elements|4 |Views 4,108
Hello all, Could you please anyone provide me umat for Hypoplastic model that used as subroutine in Abqus 6.14. With Best Regards Naif Mohammed -
Some confusion about the parameters in Abaqus umat of Hypoplastic Modeling
Joe Chu||Finite Elements|1 |Views 3,361
Dear all, When I check the umat file of sand hypoplastic modeling, I find there are two parametesr(p_t(2), bulk_w(15)) without any definitions. Could someone kindly explain the exact meaning for […] -
Slope stability calculation with hypoplasticity using phi-c reduction available now in download section
David Mašín||Finite Elements|0 |Views 3,730
The strength reduction method in clay hypoplasticity now available -
A problem of convergence from using Hypoplastic model in Abaqus
Joe Chu||Finite Elements|5 |Views 3,660
Dear all, The sand hypoplastic model has been used to simulate the interaction between soil and pile. However, there is a bad convergence in the process of calculation. When I […] -
Factor of safety in Plaxis 3D using hypoplastic model for sand
Arno Crous||Finite Elements|1 |Views 3,823
I am currently modelling a test conducted in the geotechnical centrifuge facility at HKUST. The test consisted of a sand slope with a rising water table. The slope height in […] -
Problem in calculating Lateral displacement of the pile using Hypoplastic clay model
arsalan Ahmad||Finite Elements|4 |Views 3,330
Hy Professor David, I am trying to verify the result of one of your paper by the title ‘Cyclic lateral response and failure mechanisms of semi-rigid pile in soft clay: […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
- Ignacio Zuloaga on MSE walls design in Plaxis
- Giada Orlando on Problem with VUMAT interface
I think you need to rename the file from *.for to *.f. There should not be any change in the code needed. This is like with C++, sometimes extension *.cc is used, sometimes *.cpp. David