Hello all,
I’m using the SANISAND UMAT I downloaded here for my research, the problem I found is it gives me wrong results in ABAQUS and INCREMENTAL DRIVER for element tests, especially for monotonic draind test (it doesn’t reach the peak and gives a weird curve), I’m suspecting parameter 18 called Ptmult, but I saw here that everyone gives it the value of zero which is the same value I’m using but it gives me wrong results.
Can somebody help me in this issue?
Attached deviatoric stress vs axial strain curves for monotonic triaxial test on a sand in abaqus and incremental driver (the peak should be at 1400KPa).
Thanks in advance.
Problem with SANISAND UMAT
Related Articles
-
ExCalibre Automatic Calibration
Marco Hofer||Constitutive Modelling|4 |Views 4,050
Hello all, According to my last post some weeks ago I now have translated the laboratory data from engineering strain to true strain with the following formula: epsilon(true)=ln(1+epsilon(engineering)). I compared […] -
SANISAND pile-soil-interaction ABAQUS
Lee Jae Sung||Constitutive Modelling|1 |Views 4,551
Hi everyone: I am trying to use SANISAND as the constitutive model of soil, and use ABAQUS software to simulate pile-soil interaction. First step is “Geostatic”, the second step is […] -
-
UMAT Code for Modified Cam Clay model
Mehtab Alam||Constitutive Modelling|2 |Views 5,066
I am trying to develop UMAT code for MCC, but facing difficulty. Is there any such files available which can help me to speed up. please refer. Thank you. -
Book “Modelling of soil behaviour on hypoplasticity” has been published
David Mašín||Constitutive Modelling|1 |Views 4,588
Hardcopies of my new book “Modelling of Soil Behaviour with Hypoplasticity – Another Approach to Soil Constitutive Modelling” just arrived. The book is available for hardcover or pdf orders at https://www.springer.com/us/book/9783030039752 -
Problem with VUMAT interface
Giada Orlando||Constitutive Modelling|3 |Views 3,399
Dear All, I am trying to run the VUMAT interface by Prof. Binen with the Sand Hypoplasticity. However, when I run the simulation Abaqus returns the following error: “Problem during […] -
ERROR Message when using UMAT_hcea with ABAQUS
Lukas Reindl||Constitutive Modelling|3 |Views 4,534
Hi all! I am modelling some triaxial compressions in ABAQUS with Weald Clay. The constitutive law i am using is the clay hypoplasticity by Mašín. When running the program using […] -
PM4SAND model
Mohammad Zarrabi||Constitutive Modelling|3 |Views 4,222
Hi all, I have been trying to code the PM4SAND model for several months, but I faced some problems. I was wondering if there is anyone who worked with this […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
- Ignacio Zuloaga on MSE walls design in Plaxis
dear Safia,
par 8 is axial shift of yield shape.
i.c.o. mohrcoulomb = coh/tan(phi)
Which value you use for Mc?
Dear Arie,
Thank you for your reply, I have a sand with coh=0.
However, I think I fixed the issue by giving “cz” (parameter 16) a big value = 10000, I don’t know if it will affect the calibration though.
par 8 = par 18