Hello,
This Abou Alhaija Majd, Ph.D. student at Technical University of Civil Engineering Bucharest, i am looking for Micropiles load test data to be used for calibration in my study, and would like to get some help and suggestions.
Thank you!
Micropiles load tests database
Related Articles
-
Modeling of granular soil by using UMAT hypoplastic in Abaqus
Naif Alsanabani||Finite Elements|5 |
Views 1,389
Dear all I am using the UMAT of hypoplastic model for simulation soil (3D modeling) under cyclic loading. The analysis was completed at geostatic step. But for consolidation step (soil, […] -
Calibrate hypoplastic model
sahar saab||Finite Elements|2 |
Views 839
I am trying to calibrate my sand using Excalibre. I tried some triaxial element tests using Abaqus. However the results are different between Excalibre and Abaqus. -
Hypoplasticity sand convergence issues
anis kheffache||Finite Elements|0 |
Views 858
Hi everyone, i am modeling laterally loaded monopile using abaqus, My 3d model looks like this, only half of the model is simulated, symmetry boundary conditions is applied to the […] -
hypoplasticity models in free Tochnog Professional
Silvia Imposimato||Finite Elements|0 |
Views 1,036
In this post we will list built-in hypoplasticity formulations in the free Tochnog Professional program. Since these hypoplasticity options are built-in there is no need to link external umat routines. […] -
A problem of convergence from using Hypoplastic model in Abaqus
Joe Chu||Finite Elements|5 |
Views 916
Dear all, The sand hypoplastic model has been used to simulate the interaction between soil and pile. However, there is a bad convergence in the process of calculation. When I […] -
Interpreting results of sand hypoplastic model with Abaqus VUMAT
arsalan Ahmad||Finite Elements|0 |
Views 967
Dear concern, Recently i have modelled the soil pile interaction using Abaqus CEL method. The hypoplastic behavior of the soil is model using user subroutine VUMAT. The properties of the […] -
a question on the clay hypoplasticity model with Abaqus umat
Tao Zhu||Finite Elements|7 |
Views 916
Dear all, I am a PhD student in Hohai University. Recently I have been trying to simulate a triaxial compression test using the hypoplasticity model for clay. The UMAT subroutine […] -
SANISAND 2008 model
MOHD SAQIB||Finite Elements|0 |
Views 760
Dear fellow, Anyone have SANISAND 2008 by Taiebat and Dafalias umat subroutine available for Abaqus. I have 2004 but I need 2008 one.
0 Comments
Search SoilModels Website
Recent posts
-
Shear modulus degragation 12.5.2022
-
FRIC code for clay hypoplasticity interface 23.4.2022
-
Hypo-umat sand 18.4.2022
-
Hypo-umat sand 18.4.2022
-
Using pore fluid-stress element in SandSand 9.4.2022
-
“Warning LNK4210” – hypoplastic clay UMAT 8.4.2022
-
Prague Geotechnical Days 2022 with Prague Geotechnical Lecture by prof. Cino Viggiani 7.4.2022
-
Micropiles load tests database 26.3.2022
-
DIANA 10.5 new features 10.3.2022
-
Input files for element tests for hypoplastic clay/sand UMAT 6.3.2022
-
Combining Hypoplastic-sand and Hypoplastic-clay in one UMAT file 2.3.2022
-
UMAT code for Unsaturated soil modes 19.2.2022
Recent Comments
- Alireza Lajmiri on Download package of ISA cyclic hypoplasticity for Abaqus
- Baban Bapir on Shear modulus degragation
- Rakshanda Showkat on SANISAND for FLAC3D Download
- HaoRan OUYANG on Using pore fluid-stress element in SandSand
- HaoRan OUYANG on Course “Hypoplasticity for Practical Applications”
- Miracle Dai on Hypo-umat sand
- Kassem Dib on liquefaction simulation with abaqus
- Kassem Dib on liquefaction simulation with abaqus
- Kassem Dib on liquefaction simulation with abaqus
- Kassem Dib on Transient Dynamic analysis (U-P formulation)
- Yifei Sun on matlab driver
- SPARSHA SINDURI NAGULA on SANISAND Abaqus UMAT and Plaxis implementations
- Srinivas Vivek Bokkisa on Modelling TX monotonic compressive test with ABAQUS and SANISAND – not working
- MOHD SAQIB on Modelling TX monotonic compressive test with ABAQUS and SANISAND – not working
- Srinivas Vivek Bokkisa on Modelling TX monotonic compressive test with ABAQUS and SANISAND – not working
- Jesus Mediavilla on DIANA FEA 10.3 new release – special on geotechnics
- Keng-Wit Lim on UMAT code for Unsaturated soil modes
- MOHD SAQIB on Modelling TX monotonic compressive test with ABAQUS and SANISAND – not working