Hello everybody,
Does somebody know a FEM Software with the implementation of PM4Silt model’s routine? I mean, one different from FLAC.
Thanks for your help.
Tags: PM4Silt ;Software; Finite Element;
||Finite Elements|1 |
||Finite Elements|1 |
Related Articles
-
Some confusion about the parameters in Abaqus umat of Hypoplastic Modeling
Dear all, When I check the umat file of sand hypoplastic modeling, I find there are two parametesr(p_t(2), bulk_w(15)) without any definitions. Could someone kindly explain the exact meaning for […] -
Hypoplastic model for thermal cycles in clay (Abaqus)
Dear all, I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented. I have done some runs for an axisymmetrical model for a single energy […] -
Calibrate hypoplastic model
I am trying to calibrate my sand using Excalibre. I tried some triaxial element tests using Abaqus. However the results are different between Excalibre and Abaqus. -
liquefaction simulation with abaqus
Hello, everyone I am an abaqus user and developer. Recently, I want to simulating the liquefaction phenomenon with abaqus/standard or abaqus/explicit. As I know, this cannot be realized using the […] -
How to replicate results for vertical cut in FEM program
The equations for a vertical cut in cohesive material are given in several publications including Heyman (1973): The stability of a vertical cut (see attachment Equations1.jpeg) and Verruijt (2001) Soil […] -
Tochnog Professional becomes free
After several decades of development we are happy to announce that the Tochnog Professional finite element program has become free. Both for academic and commercial use. We are extremely grateful […] -
Consideration of Ko using HP clay model
Dear SoilModels community Dear Prof. Masin / all I want to know how HP model considers Ko variation for the following cases: Ko with variation with OCR? Ko determination related […] -
ABAQUS modeling: Warning about unconnected regions when using hypoplasticity subroutine
I ran a simple 3D model with symmetry boundary conditions first using elastic material and then as hypoplastic using a subroutine. However, in the former case, I don’t get the […]
Who is Online
Supporting Organisations
Recent posts
-
Hypoplastic Interface Model: Does anybody implemented this model in FLAC3D 31.7.2020
-
Question on implementation of sand hypoplastic model with Abaqus umat 28.7.2020
-
General questions on implementation of sand hypoplasticity model with Abaqus umat 23.7.2020
-
SANISAND 2008 model 23.7.2020
-
Question on the Matlab driver – model hypo Sand 20.7.2020
-
Animating Soil Models – eLearning Project 17.7.2020
-
PM4Silt software 12.7.2020
-
Factor of safety in Plaxis 3D using hypoplastic model for sand 9.7.2020
-
Post-doc position in energy geotechnics at Aarhus University 8.7.2020
-
ERROR Message when using UMAT_hcea with ABAQUS 3.7.2020
-
Slope stability calculation with hypoplasticity using phi-c reduction available now in download section 30.6.2020
-
SANICLAY-B (2018) how to calculate Dep 22.6.2020
Opensees