Dear all,
I’m using the UMAT file in which the hypoplastic model for thermal cycles is implemented.
In the Abaqus input file I have added the two lines necessary to define the 28 constants and the 17 state variables of the User Material.
Then, after a geostatic step, I have added a consolidation step in which the ground surface is cooled down.
The consolidation step is supposed to last one day but the analysis stops after the first increment with no error messages.
As there are no error messages, it seems that the Time Period has the same size of the Initial Increment Size but this is not the case because the Time Period is set to one day.
Can anyone help me?
Thank you!
Hypoplastic model for thermal cycles (Abaqus)
Related Articles
-
Abaqus OneAPI Compiler
Kassem Dib||Finite Elements|1 |Views 7,761
Hello.. I am testing SaniSand constitutive model as published by Mr. Masin at this site. The Abaqus is V21 and the visual studio 2017 with OneAPI compiler, the Abaqus verification […] -
Interpreting results of sand hypoplastic model with Abaqus VUMAT
arsalan Ahmad||Finite Elements|0 |Views 3,667
Dear concern, Recently i have modelled the soil pile interaction using Abaqus CEL method. The hypoplastic behavior of the soil is model using user subroutine VUMAT. The properties of the […] -
Skin friction along depth of pile
Md Shafiqul Islam||Finite Elements|0 |Views 3,362
Dear all, I am simulating static pile load test in the rock by using ABAQUS. For comparison of numerical results with the experimental, I need skin friction vs depth plot. […] -
Modeling of triaxial test sample by using hypoplastic subroutine
Naif Alsanabani||Finite Elements|7 |Views 3,972
I tried to model sample of triaxial test in Abaqus program. I used hypoplastic subroutine. The parameters used in hypoplastic model was Hochstetten sand the given in website “https://web.natur.cuni.cz/uhigug/masin/plaxumat/node5.html”. The […] -
Consolidation analysis using HP clay model in Plaxis
muhammad shakeel||Finite Elements|1 |Views 3,976
Dear Prof David / SOil model community, I am performing coupled consolidation analysis for deep excavation in clay using HP clay model in Plaxis 3D. Performing the undrained analysis, the […] -
How to model the settlement in soil due to water drawdown.
Guru Panda||Finite Elements|5 |Views 4,010
Which software has the feature to model soil settlement due water drawdown? -
Barodesy download package including small strain stiffness and strength reduction (UMAT and PLAXIS dll)
Manuel Bode||Finite Elements|0 |Views 3,356
A new download package for Clay Barodesy is available in the download section (https://soilmodels.com/barodesy/) The model uses the basic model of barodesy for clay (Medicus G. and Fellin W. 2017) […] -
Using pore fluid-stress element in SandSand
Kassem Dib||Finite Elements|1 |Views 3,473
Hello everyone, Is it possible to use pore fluid- stress element in abaqus standard when soil is modeled using SANISAND constitutive model ? (UMAT)
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
- Ignacio Zuloaga on MSE walls design in Plaxis
Dear Chiara,
Maybe you could post the definition of the parameter input and the state variables. But from my experience I would guess that the initialization of the parameter or state variables is the problem (Function check_parms_hcea) . Did you checked the ifort file for some error messages?
Best regards,
Hans Henning
Hello
subscribe to and seek assistance from the
ABAQUS mailing list
https://groups.yahoo.com/neo/groups/Abaqus/info
Search the archive of the list before posting in it.
The list does not accept attachments.
Or
http://www.eng-tips.com/threadminder.cfm?pid=799
or from the ResearchGate discussion forum.
For advice on mechanics in general, including modeling,
you can consult
http://imechanica.org/
If you need subroutines: as an introduction get the file
http://imechanica.org/files/Writing User Subroutines with ABAQUS.pdf
Simulia Learning Community
3ds.com/slc
Good luck
Frank