if you could please let me know whether Is there any constitutive model exist for capturing cyclic response for cemented materials just like cemented sand and gravelly soils.
Cyclic constitutive model for cemented granular soils
Related Articles
-
Multi-objective analysis of the Sand Hypoplasticity model calibration
Francisco Mendez||Constitutive Modelling|0 |Views 942
I am happy to announce that our pre-print paper, “Multi-objective analysis of the Sand Hypoplasticity model calibration”, is available on researchgate (https://www.researchgate.net/publication/369199567_Multi-objective_analysis_of_the_Sand_Hypoplasticity_model_calibration) and Axive (https://doi.org/10.48550/arXiv.2303.07234). In this work, we study […] -
Cyclic Behavior of Sand
MOHD SAQIB||Constitutive Modelling|3 |Views 3,976
Hello, Is there any constitutive model for sand which can simulate the number of cycles to reach the critical state. I used the SANISAND model but it is not promising. […] -
Problem with SANISAND UMAT
Safia EDAOUDI||Constitutive Modelling|3 |Views 9,258
Hello all, I’m using the SANISAND UMAT I downloaded here for my research, the problem I found is it gives me wrong results in ABAQUS and INCREMENTAL DRIVER for element […] -
ALERT doctoral school on constitutive modelling – hands on session triax input files
David Mašín||Constitutive Modelling|0 |Views 4,334
ALERT doctoral school on constitutive modelling is happening right now. The school lecture notes are available at the website of ALERT geomaterials (http://alertgeomaterials.eu/publications/) Below you find triax input files for […] -
-
ExCalibre – Definiton of q
Manuel Winkler||Constitutive Modelling|3 |Views 4,146
Hello, I am performing calibration trials for the hypoplastic sand model with the aid of ExCalibre and i was wondering how the deviatoric stresses q for the triaxial test input […] -
A question about the hypoplastic model in clay
Wenbo Gu||Constitutive Modelling|7 |Views 4,353
Hello, I am writting to ask how to get the elastic modulus or undrained strength of the soil in the simulation model by using hypoplastic model in clay? Is there […] -
Looking for help
Axel Grauwinkel||Constitutive Modelling|4 |Views 352
Hello guys. I just tried to calibrate on soilmodels. I´ve done three CIUP-REC-test plus one oedometric test. As you can see in the images, that there is still something quite […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
- Leo Alibert on MSE walls design in Plaxis
Hamoun, you go too far I am afraid. There is currently a lot of uncertainty in cyclic modelling even of “simple” soils, such as sands or clays. Just few comprehensive datasets exist in the literature worldwide. I am not aware of such a dataset for a cemented soil, and if there is some, that would sure not be enough for proper development and evaluation of a constitutive model. If you need, please try some of the models for standard soils (such as ISA hypoplasticity or SANISAND). You will see yorself whether performance is good enough for you. Regards David
I was very thankful you are considering my problem and i was so pleased to hear from you.