Hi everyone:
I am trying to use SANISAND as the constitutive model of soil, and use ABAQUS software to simulate pile-soil interaction. Is it better to choose “Static, Genaral” analysis step is suitable for analysis, or “Soils” analysis step is more suitable?
SANISAND pile-soil-interaction ABAQUS
Related Articles
-
Hypo-sand UMAT problem
sobhan abedinnejad||Constitutive Modelling|2 |Views 4,227
Dear community I have 4 Question in implementation of Hypo-sand Umat in ABAQUS could someone kindly explain? 1. I checked the Umat file from (https://soilmodels.com/download/plaxis-umat-hypoplas-zip/) and i understand this subroutine […] -
stress order in hypo umat seems to be incorrect
Ran Tu||Constitutive Modelling|3 |Views 482
Dear forumers: Thanks to hypoplasticity sand UMAT provided by Prof. Masin — https://soilmodels.com/download/plaxis-umat-hypoplas-zip/. But during studying above sand UMAT, I found that the stress order may be incorrect. Because stress […] -
Intergranular strain concept modification
Piotr Kowalczyk||Constitutive Modelling|1 |Views 4,132
Hi all Just a short question on the modification of the intergranular strain concept proposed by Wegener & Herle (2014) to limit strain accumulation. In terms of the numerical implementation […] -
Soft soil model vs Soft soil creep model
Balaji Bandaru||Constitutive Modelling|1 |Views 5,060
Soft soil and soft soil creep model both include time while performing the analysis. What is the difference between both of them. -
Difference between ExCalibre and Plaxis for Oedometer test
Marco Hofer||Constitutive Modelling|3 |Views 4,214
Hello all, i did the automatic calibration for the Dobrany and Motol sand and tried to model the soil tests also in Plaxis and then to compare both. For the […] -
NorSand model for cyclic triaxial testing
A S M RIYAD||Constitutive Modelling|1 |Views 7,012
Hi altruists, Hope all of you are doing well. I am looking for literature on the NorSand model, which considers the drained cyclic triaxial testing behavior. I have found a […] -
CEL analysis using hypo plasticity Vumat
abd Elfattah||Constitutive Modelling|8 |Views 4,835
Greetings i used interface Vumat with Umat for simulating CEL problem, after 50% of analysis, i got the error as “Excessive incremental rotation of the elements in element set ” […] -
Problem in using Hypoplastic model for sand in Abaqus.
isma khabis||Constitutive Modelling|16 |Views 1,929
Hello, I am using the UMAT code for sand hypoplasticity provided by Prof. Masin — https://soilmodels.com/download/plaxis-umat-hypoplas-zip/. I am simulating Axisymmetric condition in Abaqus. To check the results given by the […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Jose Duque on Cyclic tests with Triax element test driver
- MohamadReza Kamali on How to model the settlement in soil due to water drawdown.
use static general for umat
or use Dynamic implicit