Dear all,
After carefully reading the matlab drivers of hypoplastic models, I was wondering whether the driver can simulate triaxial extension tests. As I change the constraints to reflect triaxial extension, the result is clearly not correct. My aim is to simulate different intermediate principal stress tests. Any suggestions or comments will be appreciated. Thank you!
Related Articles
-
“Warning LNK4210” – hypoplastic clay UMAT
Hello Everyone, I am using the UMAT code for clay hypoplasticity provided by Prof. Masin — https://soilmodels.com/download/plaxis-umat-hypoplas-zip/ I made a test model in Abaqus2020 and applied the umat code (umat_hcea.for). […] -
SaniSand Model in Plaxis 3D
Hello.. I am using SaniSand constitutive model, for the simulation of the behavior of onshore wind turbine using plaxis 3d. The dll file published in the website request the determination […] -
Animating Soil Models – eLearning Project
Dear all, I am currently writing a proposal for a (small & hopefully nice) eLearning project: Within the project, I would like to create animations related to constitutive modelling. I […] -
Htypoplastic Model in Miidas GTS NX
Hello.. I am defining the hypoplastic parameters for Karlsruhe sand (found in a paper) using MIDAS GTS NX. In the software the a requesting (in addition of parameters) the number […] -
Cyclic constitutive model for cemented granular soils
if you could please let me know whether Is there any constitutive model exist for capturing cyclic response for cemented materials just like cemented sand and gravelly soils. -
FRIC code for clay hypoplasticity interface
Dear Prof Stutz and Prof Mašín, Is FRIC code for clay hypoplasticity available? If yes, could you please provide me with the link to download FRIC? Thank you Haran -
SANISAND pile-soil-interaction ABAQUS
Hi everyone: I am trying to use SANISAND as the constitutive model of soil, and use ABAQUS software to simulate pile-soil interaction. First step is “Geostatic”, the second step is […] -
Difficulties in calibration of triaxial test on Hochstetten sand by sand Hypoplasticity model
“A hypoplastic relation for granular materials with a predefined limit state surface” paper by P. A. Von Wolffersdorff April 1996 include a triaxial test result of sample 10cm diameter and […]
0 Comments
Supporting Organisations
Recent posts
-
Degradation ( disturbance ) of hypoplastic clay 23.4.2024
-
Degradation ( disturbance ) of hypoplastic clay 23.4.2024
-
Paper of Coulomb, C. A. (1773) 15.4.2024
-
ABAQUS UMAT of hypoplastic clay model 6.4.2024
-
Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
-
UMAT for Creep-SCLAY model. 1.3.2024
-
Cyclic tests with Triax element test driver 14.2.2024
-
SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
-
COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
-
MSE walls design in Plaxis 11.12.2023
-
sand liquefaction modelling in Anura3D 8.12.2023
-
BCV bentonite experimental and modelling datasets 14.11.2023