Dear all,
I am trying to use Abaqus to modeling undrained cyclic triaxial test for liquefiable soil. I am wondering how could I applied the cyclic load. I should apply it by amplitude or I should the loading sequence in soil constitutive model? If anyone knows familiar with that, please help me.
Thanks,
Shile
Modeling cyclic undrained sandy soil triaxial test using ABAQUS
Related Articles
-
Modelling cyclic loads in Tochnog
Abdulaziz Abdelkadr||Finite Elements|0 |Views 3,237
Dears all, I am using Tochnog professional software to model undrained cyclic triaxial test for behaviour and liquefaction studies. Is there an incremental driver model to execute for compressional cyclic […] -
Seismic Liquifaction
MOHD SAQIB||Finite Elements|2 |Views 3,445
Hello All, I am trying to simulate the seismic liquefaction in Abaqus. Can you please help me to model this. Best Regards’ Saqib -
A problem of convergence from using Hypoplastic model in Abaqus
Joe Chu||Finite Elements|5 |Views 3,671
Dear all, The sand hypoplastic model has been used to simulate the interaction between soil and pile. However, there is a bad convergence in the process of calculation. When I […] -
An error in the SANISAND umat runtime
Zhentao Liu||Finite Elements|15 |Views 1,852
Dear all I was simulating a pile in a fully drained soil subjected to horizontal loads using ABAQUS (as shown in Figure 1) and noticed from the monitor that the […] -
Vibration foundation behavior
Naif Alsanabani||Finite Elements|0 |Views 4,611
Dear all I have FEM analysis results for vibration foundation response that rested either on saturated salt-encrusted flat soil (case-1) or on finite cemented sand overlie saturated salt-encrusted flat soil […] -
Boundary Conditions of Masin 2005 Paper for clay hypoplasticity
Shen Wang||Finite Elements|4 |Views 3,703
Hello, I am using clay hypoplastic umat code and trying to verify the code with the simulation on the paper of Prof. Masin. I found in the paper (Masin, 2005, […] -
SANISAND 2008 model
MOHD SAQIB||Finite Elements|0 |Views 3,289
Dear fellow, Anyone have SANISAND 2008 by Taiebat and Dafalias umat subroutine available for Abaqus. I have 2004 but I need 2008 one. -
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Jh Xue on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
Dear Shile,
for element tests, it is better to use a Matlab script rather than Abaqus, which would be much slower. The cyclic loading can be applied by either amplitude deviatoric stress or amplitude axial strain.
Best regards
Dear Shile,
I suggest you to use software like: Incremental Driver or Triax elemnet test Driver. Those element test softwares are much more convenient for you to modeling undrained cyclic loading traixal tests.
You can find them in this website.
Regards
I am also trying to figure out how exactly can anyone apply cyclic loading in Abaqus. I apply amplitude/time data for the same but my deviatoric stress isn’t reaching the negative side. Can anyone tell me how to apply stress-controlled cyclic load in Abaqus?. e:g qmax(max deviatoric stress is +-300.