Hi,
I am working in Abaqus, aiming to model double porosity clay consolidation data by using hypoplastic clay model with meta stable structure. First, i just wanted to verify basic model using simple axisymmetric geometry (Triaxial Test) in Abaqus. So i used material Parameters as : 22.611e-5,.11,.016,.4 and rest all zero. As a standard procedure i included umat_hcea.for file in the job module and ran my job. I got the error that UMAT was missing, so i opened the umat_hcea.for and replaced first word after usersubroutine by UMAT and finally job completed successfully. I am simply loading under isotropic conditions and then unloading but my when i checked the void ratio upon unloading, it didn’t follow k line it retracted along lambda curve only. Also the void ratio is decreasing not along butterfield’s criteria but along e-lnp’ space (i checked by hand calculations). Can any one suggest me where i could be wrong and also, is there any change that i have to make in the fortran file like the one mentioned above?. Any help would be great .
UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
Related Articles
-
-
Problem with Hypoplastic Vumat use with CEL in Abaqus
Abdulkader ELHAJ||Finite Elements|0 |Views 3,379
Hello all, I am currently working on the FE modeling of anchors installation into the soil using the CEL analysis in Abaqus. I tried to use the hypoplastic vumat for […] -
Few more Question on calculating lateral displacement of pile using hypoplastic clay model
Muhammad Ahmad||Finite Elements|0 |Views 3,871
Dear Professor David, Thank you very much for your previous clarification. its really helps. In continuation to my previous , there are few more question, i want your kindself to […] -
Problem in simulating CPT using SANISAND04
an zhanng||Finite Elements|6 |Views 1,459
I have a question regarding the simulation of cone penetration tests using the SANISAND04 model. I have observed that the parameter m (yield surface size)has a significant impact on the […] -
How to replicate results for vertical cut in FEM program
Amine Aboufirass||Finite Elements|0 |Views 3,488
The equations for a vertical cut in cohesive material are given in several publications including Heyman (1973): The stability of a vertical cut (see attachment Equations1.jpeg) and Verruijt (2001) Soil […] -
set cavitation limit in ABAQUS/STANDARD when using SANISAND umat
Zhentao Liu||Finite Elements|6 |Views 3,064
Dear all I am recently working on the mechanical characteristics of large diameter monopiles under horizontal loads.The numerical simulation part of this project was carried out in ABAQUS/STANDARD and for […] -
hypoplasticity model with Abaqus umat on Brno clay
mahdie masoudi||Finite Elements|5 |Views 4,116
Dear all, I am a Ph.D. student at Kharazmi University. Recently I have been trying to simulate a triaxial compression test using the hypoplasticity model for clay using ABAQUS. The […] -
Barodesy download package including small strain stiffness and strength reduction (UMAT and PLAXIS dll)
Manuel Bode||Finite Elements|0 |Views 3,357
A new download package for Clay Barodesy is available in the download section (https://soilmodels.com/barodesy/) The model uses the basic model of barodesy for clay (Medicus G. and Fellin W. 2017) […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Jh Xue on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
My issue has been resolved, i think it was related to initialization of State depenedent Varaiables. Once i did that results are fine.
can you please let me know how to initialize state dependent variables?
Is it through sdvini subroutine? if so can you please forward me the fortran file which includes both sdvini and umat subroutines.
i have added the following code to umat plz check if it works-
subroutine sdvini(statev,coords,nstatv,ncrds,noel,npt,layer,kspt)
c
INCLUDE ‘ABA_PARAM.INC’
c
DIMENSION STATEV(NSTATV),COORDS(NCRDS)
c
statev(1) = 0
statev(2) = 0
statev(3) = 0
statev(4) = 0
statev(5) = 0
statev(6) = 0
statev(7) = 0.52
statev(8) = 0
statev(9) = 0
statev(10) = 0
statev(11) = 0
statev(12) = 0
statev(13) = 0
statev(14) = 0
statev(15) = 0
statev(16) = 0
c
return
end
c——————————————————————————
can you please let me know how to initialize state dependent variables?
Is it through sdvini subroutine? if so can you please forward me the fortran file which includes both sdvini and umat subroutines.