Dear all,
I want to implement a new user element using the UEL subroutine. To simulate dynamic cases, one has to define the mass, damping and stiffness matrix then build the RHS and AMATRIX as defined by abaqus.
The stiffness matrix K is obtained by integrating the material tangent matrxis (DDSDDE) over the element’s volume.
My questions are the following:
-UEL having no argument for stress and strain (STRESS,STRAN…Dstran), do i have to define them my self? (by derivative of the displacements U,DU ?
-The tangent material matrix (DDSDDE) being strain and stress dependent, i need to define the stresses and strains in the UEL, then i need to call the UMAT to return DDSDDE. Do i also have to perform Newton raphson itterations to correct for non linearity? (in umat this would have been done by abaqus itself, but when i call umat inside uel i am not sure…)
Abaqus UEL Hypoplasticity
Related Articles
-
ExCalibre Automatic Calibration
Marco Hofer||Constitutive Modelling|5 |Views 4,172
Hello all, i have another question regarding the calibration process. Why do the initial void ratios differ between the input file and the output from excalibre? What is done during […] -
UMAT for strain-rate effects
Luis Zambrano-Cruzatty||Constitutive Modelling|0 |Views 3,970
Dear community, I’m interested in constitutive models that can handle strain-rate effects for HSR on sands for simulating free fall penetration. I would appreciate any help. Do you know any […] -
Sanisand umat with BV problem
Luis Aviles||Constitutive Modelling|0 |Views 3,871
Hi, Does someone know if sanisand implementation has been used in a boundary value problem for slope? do you have any references? Thanks very much! -
ERROR Message when using UMAT_hcea with ABAQUS
Lukas Reindl||Constitutive Modelling|3 |Views 4,540
Hi all! I am modelling some triaxial compressions in ABAQUS with Weald Clay. The constitutive law i am using is the clay hypoplasticity by Mašín. When running the program using […] -
Challenges in simulating geomechanical models using Mohr-Coulomb with Tension Cut-Off in Abaqus
Chee Min Leong||Constitutive Modelling|1 |Views 1,711
I am modelling an underground cavern for Compressed Air Energy Storage applications using Abaqus. To begin, I attempted to replicate the results presented in the provided paper: Damasceno, DR, Spross, […] -
Question on the Matlab driver-hypoplastic models
c sx||Constitutive Modelling|0 |Views 4,094
Dear all, After carefully reading the matlab drivers of hypoplastic models, I was wondering whether the driver can simulate triaxial extension tests. As I change the constraints to reflect triaxial […] -
Combining Hypoplastic-sand and Hypoplastic-clay in one UMAT file
anis kheffache||Constitutive Modelling|0 |Views 3,801
Hi everyone, i have combined both Hypoplastic sand and clay umats in one umat ( to use for example in the case of multilayered soil medium made of clay and […] -
lade umat file
sobhan abedinnejad||Constitutive Modelling|0 |Views 4,209
Hi everyone, I work on soil constitutive models and I want to compare soil behaviours with various constitutive models but I can’t find Lade umat in the .for format. Can […]
0 Comments
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
- Arie Koot on How to model the settlement in soil due to water drawdown.
- Konstantinos Chatzis on Cyclic tests with Triax element test driver