||Finite Elements|0 |
Dear all,
I need to use ABAQUS to analyze the liquefaction of saturated soil under explosive load. How should I simulate this process? Currently I need the pore water pressure of the soil under blast load. However, in the dynamic explict analysis step, there is no field variable of POR, which only exists in the soil analysis step.
Thank you.
Correct my Plaxis FEM simulation in foundation bearing capacity results 3.4.2026
mohr coulomb 2D yield surface vs 3D mohr coulomb yield surface 28.2.2026
Problem with GeoStudio (Seepage) software 16.2.2026
Prague Geotechnical Days 2026 3.2.2026
Postdoctoral position at COFS, UWA 28.7.2025
Hypoplasticity clay in ABAQUS 23.7.2025
Drucker-Prager Cap 29.5.2025
Abaqus RITSS with hypoplastic 9.4.2025
Fellin UMAT subroutine 2.4.2025
Hypoplasticity clay for triaxial compression in abaqus 26.3.2025
Abaqus RITSS methon for LDFE analysis with hypoplastic 17.3.2025
Request for VUMAT Implementation of Mohr-Coulomb, Drucker-Prager, or Drucker-Prager Cap 28.2.2025
©2026 SoilModels
