I am trying to calibrate my sand using Excalibre. I tried some triaxial element tests using Abaqus. However the results are different between Excalibre and Abaqus.
Calibrate hypoplastic model
Related Articles
-
Analys soil liquefaction with Abaqus under blast load
Alex Liu||Finite Elements|0 |Views 295
Dear all, I need to use ABAQUS to analyze the liquefaction of saturated soil under explosive load. How should I simulate this process? Currently I need the pore water pressure […] -
Modeling of granular soil by using UMAT hypoplastic in Abaqus
Naif Alsanabani||Finite Elements|5 |Views 4,031
Dear all I am using the UMAT of hypoplastic model for simulation soil (3D modeling) under cyclic loading. The analysis was completed at geostatic step. But for consolidation step (soil, […] -
Skin friction along depth of pile
Md Shafiqul Islam||Finite Elements|0 |Views 3,365
Dear all, I am simulating static pile load test in the rock by using ABAQUS. For comparison of numerical results with the experimental, I need skin friction vs depth plot. […] -
Free Tochnog Professional list of capabilities and papers
Dennis Roddeman||Finite Elements|0 |Views 3,355
Dear All, you can find a list with some of Tochnog Professional capabilities and application papers at: http://www.tochnogprofessional.nl/Tochnog_Professional_wikipedia_format.pdf Stay safe, Dennis Roddeman -
Problem in calculating Lateral displacement of the pile using Hypoplastic clay model
arsalan Ahmad||Finite Elements|4 |Views 3,337
Hy Professor David, I am trying to verify the result of one of your paper by the title ‘Cyclic lateral response and failure mechanisms of semi-rigid pile in soft clay: […] -
new hypoplasticity laws in Tochnog Professional
dennis roddeman||Finite Elements|1 |Views 3,334
The 2014 Masin hypoplasticity for clays has been implemented in Tochnog Professional under guidance of Dr. David Masin. This implementation includes structure, intergranular strains and visco effects. Extensions to the […] -
hypoplasticity models in free Tochnog Professional
Silvia Imposimato||Finite Elements|0 |Views 3,615
In this post we will list built-in hypoplasticity formulations in the free Tochnog Professional program. Since these hypoplasticity options are built-in there is no need to link external umat routines. […] -
Calculation of coordinates of climbing formwork using hypoplasticity and pressuremter tests
Christian Schwab||Finite Elements|0 |Views 3,301
Our article published in the latest issue of Ground Engineering 10/2017. Great combination of cone-pressueremeter-testing (CPM) by FUGRO and advanced 3D Fem modelling by GEOLINK using hypoplastic constitutive equations to […]
Who is Online
No one is online right now
Search SoilModels Website
Recent posts
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Degradation ( disturbance ) of hypoplastic clay 23.4.2024
- Paper of Coulomb, C. A. (1773) 15.4.2024
- ABAQUS UMAT of hypoplastic clay model 6.4.2024
- Prague Geotechnical Days 2024 “Geotechnical monitoring” and 30th jubilee Prague Geotechnical Lecture by prof. Eduardo Alonso 5.4.2024
- UMAT for Creep-SCLAY model. 1.3.2024
- Cyclic tests with Triax element test driver 14.2.2024
- SUMMER SCHOOL ‘Numerical Modelling in Geotechnical Engineering’, Innsbruck – July 22nd-26th, 2024 1.2.2024
- COURSE IN SOIL MODELING – NTNU, Trondheim – October 14th to 18th, 2024 21.12.2023
- MSE walls design in Plaxis 11.12.2023
- sand liquefaction modelling in Anura3D 8.12.2023
- BCV bentonite experimental and modelling datasets 14.11.2023
Recent Comments
- Ramon Varghese on Hypoplastic Interface Model: Does anybody implemented this model in FLAC3D
- Jh Xue on UMAT Implementation in Abaqus (Hypoplastic clay Subroutines)
- Santosh Katuwal on PM4Sand for Plaxis Download
- KHA DIDJA on SANISAND Abaqus UMAT and Plaxis implementations
- Debdip Das on SANISAND Abaqus UMAT and Plaxis implementations
- Ramon Varghese on SANISAND for FLAC3D Download
- Akhtyar Gul Shirzoi on ABAQUS UMAT of hypoplastic clay model
- KHA DIDJA on Animating Soil Models
- Jh Xue on Undrained Tests with Clay Hypoplasticity Intergranular
- Zhentao Liu on Problem in simulating CPT using SANISAND04
- Gertraud Medicus on ABAQUS UMAT of hypoplastic clay model
- Chen Zhiming on Download Package of Charles University Implementation of High Cycle Accumulation Model
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Abhay Pratap Singh on Cyclic tests with Triax element test driver
- Giovanni Ciardi on Cyclic tests with Triax element test driver
- Konstantinos Chatzis on Cyclic tests with Triax element test driver
- Ismail Khan on Cyclic tests with Triax element test driver
- Kanika Lamba on Cyclic tests with Triax element test driver
Hi Sahar, please also check the initial void ratio for triaxial tests indicated by excalibre. This is the only issue I can think about, otherwise you have some error in Abaqus input.
Hi David, this is the input file for my abaqus model. This input file is for the sand example “lapProtocalTemplate-Sand” shared on Excalibre automatic calibration page. I got the hypoplastic parameters from Excalibre and input them into Abaqus. The peak of deviatoric stress-strain curve from Abaqus is much higher than the experimental curve and the Excalibre curve. I can’t find the mistake in my input.
*Heading
** Job name: CD-50-Excalibre-Sample-Sand Model name: CD-50-Excalibre-Sample-Sand
** Generated by: Abaqus/CAE 2016
*Preprint, echo=NO, model=NO, history=NO, contact=NO
**
** PARTS
**
*Part, name=Part-1
*Node
1, 0., 0.
2, 0.100000001, 0.
3, 0., 0.100000001
4, 0.100000001, 0.100000001
5, 0.0500000007, 0.
6, 0.100000001, 0.0500000007
7, 0.0500000007, 0.100000001
8, 0., 0.0500000007
*Element, type=CAX8
1, 1, 2, 4, 3, 5, 6, 7, 8
*Nset, nset=Set-1, generate
1, 8, 1
*Elset, elset=Set-1
1,
*Nset, nset=top-n
3, 4, 7
*Nset, nset=bot-n
1, 2, 5
*Nset, nset=axis
1, 3, 8
** Section: Section-1
*Solid Section, elset=Set-1, material=Material-1
,
*End Part
**
**
** ASSEMBLY
**
*Assembly, name=Assembly
**
*Instance, name=Part-1-1, part=Part-1
*End Instance
**
*Elset, elset=EL, instance=Part-1-1
1,
*Elset, elset=_Surf-1_S2, internal, instance=Part-1-1
1,
*Elset, elset=_Surf-1_S3, internal, instance=Part-1-1
1,
*Surface, type=ELEMENT, name=Surf-1
_Surf-1_S2, S2
_Surf-1_S3, S3
*End Assembly
**
** MATERIALS
**
*Material, name=Material-1
*Density
1.0927,
*Depvar
13,
*User Material, constants=16, unsymm
36.5, 1.,49846., 0.243, 0.572, 1.144, 1.372, 0.09
4.5, 0., 0., 0., 0., 0., 0., 0.51
**
** BOUNDARY CONDITIONS
**
** Name: axis-bc Type: Displacement/Rotation
*Boundary
Part-1-1.axis, 1, 1
** Name: bot-bc Type: Displacement/Rotation
*Boundary
Part-1-1.bot-n, 2, 2
** Name: top-bc Type: Displacement/Rotation
*Boundary
Part-1-1.top-n, 2, 2
**
** PREDEFINED FIELDS
**
** Name: Predefined Field-1 Type: Geostatic stress
*Initial Conditions, type=STRESS, GEOSTATIC
Part-1-1.Set-1, -50., 0.1, -50., 0., 1., 1.
** Name: Predefined Field-2 Type: Void ratio
*Initial Conditions, TYPE=RATIO
Part-1-1.Set-1, 0.51
** —————————————————————-
**
** STEP: Step-1
**
*Step, name=Step-1, nlgeom=NO
*Geostatic
**
** LOADS
**
** Name: Load-1 Type: Pressure
*Dsload
Surf-1, P, 50.
**
** OUTPUT REQUESTS
**
*Restart, write, frequency=0
**
** FIELD OUTPUT: F-Output-1
**
*Output, field
*Node Output
U,
*Element Output, directions=YES
E, S
**
** HISTORY OUTPUT: H-Output-1
**
*Output, history, variable=PRESELECT
*End Step
** —————————————————————-
**
** STEP: Step-2
**
*Step, name=Step-2, nlgeom=NO, inc=1000
*Static
0.001, 1., 1e-15, 1.
**
** BOUNDARY CONDITIONS
**
** Name: top-bc Type: Displacement/Rotation
*Boundary
Part-1-1.top-n, 2, 2, -0.05
**
** LOADS
**
** Name: Load-1 Type: Pressure
*Dsload
Surf-1, P, 50.
**
** OUTPUT REQUESTS
**
*Restart, write, frequency=0
**
** FIELD OUTPUT: F-Output-1
**
*Output, field
*Node Output
U,
*Element Output, directions=YES
E, S
**
** HISTORY OUTPUT: H-Output-1
**
*Output, history, variable=PRESELECT
*End Step